Precision Metal Processing SDS2MS DRO SINO Two-Axis Digital Reading Display

Common Two-Axis Digital Reading Display For Precision Metal Processing Is SDS2MS DRO

Two axis SDS 2MS digital DRO and KA grating ruler, with the following characteristics:

1. Dual axis DRO: With this kit, you can simultaneously monitor and control the movement of a machine tool along two axes, such the X and Y axes in a milling machine. This enables you to evaluate the equipment's operational condition in a transparent manner.
2. Magnetic ruler encoder system: To produce accurate and dependable readings, the KA linear ruler encoder system uses magnetic technology. The DRO display unit and the magnetic balance installed on the machine shaft, which are used to track the job's state and offer position feedback at any time, instantly reflect the equipment's position.

3. Wide voltage range: The 100V to 240V AC voltage range is where the SDS 2MS DRO kit performs best. It is compatible with many power supply standards thanks to its ability to regulate voltage. If the voltage is set properly, the device can function as intended.
4. User-friendly interface: The DRO display unit's interface is easy to use and usually consists of buttons and a digital display screen. You may save time by switching between different measurement data by utilizing the feature button.

Capabilities possessed:

1. Convert radius to diameter.

2. Converting mm to inches.

3. Conversion from absolute to relative.

4. The function that splits in half.

5. "R" function is simple.

6. The "R" function is smooth.

7. Positioning the PCD hole around the perimeter.

8. Zero position memory for 200 groups.

Detailed parameters of DRO SDS2MS digital readout system:

1. Voltage range: AC 85 v ~ 250 v / 50 hz ~ 60 hz

2. 15w power consumption: 25 va

3. Coordinate the number: a coordinates, two coordinates

4. Show that signed seven display (two or three axis) output data information using eight meters words show symbols

5. Net Weight: 1.3kg/2.9lb

6. The input signal: TTL, EIA - 422 open collector output signal, convenient interface with a programmable controller.

7. Allow the input signal frequency: > 100 KHZ

8. To connect a resolution: 10 microns, 5 microns, 2 microns, 1 mu m, 0.5 microns

Product image /photos:

​

The rack in the picture is optioned, not standard product.