Digital Readout Display With Precise Positioning Function For 2-Axis DRO SDS2MS

Digital Readout Display With Precise Positioning Function For 2-Axis DRO SDS2MS

Introduction to SDS2MS:

The 2-axis KA300 linear error correction and nonlinear error correction magnetic scale system, as well as the SDS 2MS digital DRO, contain the following features:
Dual axis DRO: With the support of this kit, you may simultaneously monitor and control the movement of the machine along two axes, for example, the X and Y axes in a milling machine. This enables you to analyze the equipment's functioning condition with great clarity.
Magnetic ruler encoder system: To produce precise and consistent readings, the KA linear ruler encoder system makes use of magnetic technology. The DRO display unit and the magnetic balance, which is mounted on the machine shaft, are utilized to monitor work progress and offer position feedback at all times.

Broad voltage range: Between 100V and 240V AC, the SDS 2MS DRO kit is made to operate best over a broad voltage range. Its ability to adjust voltage guarantees interoperability with different power supply standards.
Interface that is easy to use: The DRO display unit features an interface that is easy to use, often consisting of buttons and a digital display screen. You can save time by switching between different measurements of u.

Capabilities possessed:

1. Radius/diameter conversion.

2. MM/Inch conversion.

3. Absolute/relative conversion.

4. Mid-splitting function.

5. Easy "R" function.

6. Smooth "R" function.

7. PCD hole positioning on circumference.

8. 200 groups zero position memory.

Detailed parameters of DRO SDS2MS digital readout system:

1. Voltage range: AC 85 v ~ 250 v / 50 hz ~ 60 hz

2. 15w power consumption: 25 va

3. Coordinate the number: a coordinates, two coordinates

4. Show that signed seven display (two or three axis) output data information using eight meters words show symbols

5. Net Weight: 1.3kg/2.9lb

6. The input signal: TTL, EIA - 422 open collector output signal, convenient interface with a programmable controller.

7. Allow the input signal frequency: > 100 KHZ

8. To connect a resolution: 10 microns, 5 microns, 2 microns, 1 mu m, 0.5 microns

Product image /photos:

​

The rack in the picture is optioned, not standard product.