15VA Practical SINO 3 Axis DRO , Plastic Linear Scale DRO System

SINO Economy 3 Axis LED Digital Display DRO SDS2-3MS

SDS2-3MS is the three axes veriosn of SDS2 series Digital Display DRO.

This series' digital display DRO is an economy version of SDS6 series digital display readout.

It employs the newest 16 bits SCM technology and is allowed to input the high frequency of A/B signals up to 5MHz.

That can be suitable for most of the machine, like the high precision coordinate boring machine, floor boring machine, grinding machine, lathe, milling machine and so on.

And the plastic case make the weight ligher for cheaper transportation propose.

Stronger Functions:

1. Upgrade the calculator function:

Decimal digits can be three, four or five digits to improve the calculating precision.

2. Non-linear error compensation:

Maximum 40 sections non-linear error compensation to improve the machining precision.

3. The numbers of decimal digits can be chosen in inch mode:

4 / 5 decimal digits can be chosen in inch mode. 4 digits can satisfy long scale requirement, and 5 digits can satisfy high precisions display.

Remark :

Supply Voltage Range: AC100~240V; 50~60Hz, different plug could be available

Power consumption: 15VA

Operating temperature: 0~45 degrees centigrade

Storage temperature: -30~70 degrees centigrade

Readout allowable input signal: TTL/RS422 square wave

Allowable input signal frequency: Less than 5MHz

Max resolution of digital display length: 0.5µm

Min resolution of digital display angle :0.0001/pulse

Product image /photos:

The rack in the picture is optioned, not standard product.