10Gbps Full Rate Clock Recovery Instrument Provides Clock Recovery
Signal
U9110A 10G optical oscilloscope is the latest digital communication
analysis solution launched by Youxi Instrument. It provides an
ideal measuring tool for the manufacturing of optical communication
devices.
The results of the U9110A DCA measurement are not only raw data,
but also histograms with time and amplitude, Mask tests,
statistical tests, etc. It provides a set of communication
indicator test Settings, including interval period, rise time, fall
time, cross percentage, extinction ratio, jitter, and amplitude
measurement. It also includes SDH/SONET, Mask tests for Gigabit
Ethernet, and other standard single compliance tests.
Function introduction:
1. Automatic ITU/ANSI Mask test
2. User operation and graphical display interface based on PC
Ethernet communication software
3. Modular structure, fast sampling rate
4. High-fidelity signal (Jitter< 0.1ps, RMS-Typical)
Optical oscilloscope introduction:
An optical oscilloscope is a measuring instrument that usually
consists of a measuring head (including a transmitter and receiver)
and a display memory. The measuring head converts high-speed
electrical signals into optical signals and transmits these optical
signals to the display memory for processing. Display memory is
used to store, process, and display optical signal data.
An optical oscilloscope works by sending a high-speed electrical
signal into the measuring head, which is converted into very short
laser pulses, which are then transmitted to the display memory and
recorded. By observing the recorded optical signal data, it is
possible to infer the properties of the original electrical signal,
such as frequency, amplitude, offset, etc.
Specification
| standard rate | 1.25G ~30G |
| Measurement accuracy Mask margin (Margin) | ±3 % |
| Display Characteristics Image Resolution | 1024×768 pixels |
| digital measurement system | Support 1~2 optical channel measurement, refresh optional
measurement 3 times per second |
| Signal acquisition mode | Sampling (Normal), Envelope, Average |
| RMS noise | 0.25mV (10GHz) ,0.5mV(30Ghz) |
| Number of sampling channels | 1~4 Channel |
| Vertical System Conversion Time | Depending on the number of sampling channels, 8.75ps (30GHz) |
| RMS noise (max) | 0.5mV(10GHz),1.0mV(30GHz) |
| Horizontal system Waveform zoom in and zoom out observation time
base | 0.5ps/div to 1ms/div |
| Time interval accuracy (jitter mode) | 0.25ps(10GHz), 0.0625ps(30GHz) |
| Trigger system External clock source | 100mV,155~2500MHz(10GHz), 155~622MHz(30Ghz) |
| Trigger level range | ±1.0V |
| trigger input range | ±1.5V |
| Trigger cutoff | ±1.5V:5ms ~100ms |
| Power (external power adapter) | 50Hz,5V,3A,6W |
| Ambient temperature, relative humidity Operation | Temperature-20 to ~50℃ , Humidity 20% to ~80% |
| storage | Temperature -40 to ~85℃ , Humidity 5% to ~90% |
| Size | 235W×55H×255L (mm) |
| Weight | ＜2Kg |
| Communication, network management interface | RJ45; support 10/100Mbps Ethernet |
