Solar Powered Outdoor 80 Led Security Light With Motion Sensor

Solar Powered Outdoor 80 Led Security Light With Motion Sensor

Specification:

• Solar Powered

The solar motion sensor light outdoor powered by solar energy, no need for

electricity bills and environmentally friendly.

Built-in rechargeable battery capacity can produce longer working time.

• OPERATION

1. Turn on the power switch to “ON” to activate the solar security light.
2. The light will automatically turn ON during the night.
3. Test the light by walking or driving into the protected area.
4. The lamp should light up temporarily when motion is detected.
5. The light will be remaining as long as the motion moves and detects.
6. The light will turn off within 45 seconds after motion disappear.

• Installation

Before install the unit, turn on the switch which locate at the plastic box of the

light, and cover the motion sensor head by hand very closely to ensure the light

can turn on after some seconds. Then you can start to install the light as follow.

1) Choose a place where need lights at night and the select location should

better situate the solar panel where there is abundant sunshine during the day.

2) Mark the hole location of the solar panel box, then set the solar panel aside.

3) Check that the marked areas are clear of obstacles such as cables and

electrical lines. Drill holes for the enclosed screws and plastic anchors.

4) Measure the space between the two hoes on the lamp and drill another

hole on the wall accordingly. Insert the dry anchor and screw.

5) Secure the lamp in place with the screws.