RFID automatic door swing gate pedestrian temperature measurement
machine
Features
Power supply voltage: AC220±10%V, 50HZ; Drive motor: DC motor
DC24V;
Working environment: -25℃-+70℃ Passing speed: high 20--40
people/min;
Switching time: 0.2 seconds; Relative temperature: 5%--90% without
condensation;
Gate size: 1400*290*1000mm; Channel width: 600MM;
No failure times: more than 1.5 million times; time required to
enter the traffic state after power-on: 1~3 seconds
Waterproof and dustproof: the grade is above IP32; working noise:
below 55 decibels;
Fault self-test: automatic reset time after fault: 6~10 seconds
Chassis material: 304 stainless steel, thickness 1.2MM;
Input interface: relay switch signal or 12V level signal or 12V
pulse signal with pulse width>100ms, drive current>10mA
Flap Barrier Advantage:
1. Problem-self-checking function.
2. Arm Turning: Bi-direction
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be
set in the control panel.
5. Auto-reposition function: After card read, passenger doesn't
pass within regulated time, turnstile
will cancel order automatically. And the regulated time can be set
by managers.
6. Anti-rush function: if there is no open signal, arm will be
holding tightly.
7. Stable running with little noise.
| Infrared radio | 5 pairs |
| trouble-free operation | 2 million times |
| average life span | 3 million times |
| Channel width | 850mm |
| Door wing material | Soft wing sponge |
| Product size | length 1200mm x width 300mm x height 990 mm |
| Channel frame | 304 stainless steel |
| Packing weight | bout 65 KG (single side lane) |
