85739000 GT1000 GTXL Cutting Parts Idler X-Axis Pulley Synchronous Belt Pulley

85739000 GT1000 Cutter Parts Suit GTXL Gerber Cutting Parts Idler X-Axis Pulley Synchronous Belt Pulley:

1. GT7250 Cutter Parts S7200 Cutter Spare Parts ...

GTXL Cutting Parts GT1000 Cutter Spare Parts.pdf

Details:
 

DT Part Name: Idler X-Axis Pulley Synchronous Belt Pulley

Part Number:85739000

Part Performance: Pca Assy Bcc Gtxl Pkg

Delivery Time: Within 24 hours

Trade Term : EXW (100% payment before shipment)

Dingtao(DT) Supply Below Drills for your,

126267 Drill D=2 MP/MH-MX/iX69-Q58-iH58

126270 Drill D=3 MP/MH-MX/iX69-Q58-iH58

130180 Drill D= 4 MH-MX/iX69-Q58-iH58

130181 Drill D= 5 MH-MX/iX69-Q58-iH58

130182 Drill D= 6 MH-MX/iX69-Q58-iH58

130183 Drill D=7 MH-MX/iX69-Q58-iH58

130184 Drill D=8 MH-MX/iX69-Q58-iH58

130185 Drill D=9 MH-MX/iX69-Q58-iH58

130186 Drill D=10 MH-MX/iX69-Q58-iH58

130187 Drill D=11 MH-MX/iX69-Q58-iH58

130188 Drill D=12 MH-MX/iX69-Q58-iH58

128697 Drill Teflon D=13 MP/MH-MX/iX69-Q58-iH58

128698 Drill Teflon D=14 MP/MH-MX/iX69-Q58-iH58

128699 Drill Teflon D=15 MP/MH-MX/iX69-Q58-iH58

128700 Drill Teflon D=16 MP/MH-MX/iX69-Q58-iH58

128701 Drill Teflon D=17 MP/MH-MX/iX69-Q58-iH58

128702 Drill Teflon D=18 MP/MH-MX/iX69-Q58-iH58

128703 Drill Teflon D=19 MP/MH-MX/iX69-Q58-iH58

Recommended other Cutter Parts:

54685002 FRAME,GUIDE,ROLLER,LOWER,S-93-7/S-93-5

73447001 YOKE, KI, S-93-7 / S72

56435000 PIN,SIDE,LWR RLR GD,S-93-5/S-93-7

69338000 PIN,REAR,LWR RLR GUIDE,CARB.,S-93

854500536 SCREW,#6-32X3/4''LG,HHCS, ZN PL STEEL

649024040 NUT, #6-32 (SPECIAL)

66882000 ROLLER,REAR,LWR RLR GD,S-93-7/S72

21306000 LEVER,DETENT.,SOLENOID.,SHARP.

72376001 KIT,SPACERS,BEARING,C-AXIS,S-93/7

74753000 PLATE, FLANGE, TORQUE TUBE

56144000 BUMPER,STOP,Y-AXIS,GC2001/S-93-5

57699000 PULLEY,ASSY,IDLER,S-93-7,LANC.,IMPROVED

180500084 BELT, TIMING, 90T, KNIFE DRIVE ASS'Y

180500077 BELT, TIMING, 75T, KNIFE DRIVE ASS'Y

Please kindly note that our brand is DINGTAO(DT).

Our spare parts are especially suitable for cutter machine, spreader and plotter of Gerber/Lectra /Bullmer/ / Kuris/ Graphtec.But there is no relationship between us and these companies.Just because the cutter machine industry and customers always use these words to describe the spare parts. So we can only describe our products by such words,suitable for Gerber Cutter Machine , Gerber Auto Cutter Machine ,Gerber Cutter Parts,Gerber Cutter Spare Parts,Gerber Auto Cutter Parts, Lectra Cutter Parts,Lectra Cutter Spare Parts,Lectra Auto Cutter Parts,Lectra Cutter Machine,Lectra Auto Cutter Machine ,Yin Cutter Parts, Yin Cutter Spare Parts,Yin Auto Cutter Parts,Yin Cutter Parts, etc.

How do you use a Gerber machine?

The correct use of the Gerber cutting machine is very important. First, in the process of use, it is necessary to specially equip cutting engineers to carry out standardized operations. Second, it requires regular monthly inspection and maintenance. Third, if the machine fails, Cutter Parts should be replaced in time. After the above operations, the normal and efficient use of the machine can be maintained.