Inspection Principle
This plan is target on 130~155ml round medicine bottles, and the
samples covered can be: plastic bottles of various specifications,
and judge whether they are compatible according to the actual
situation of the products. For incompatible products and different
testing needs, we will customize the solution individually.
Determine the number of cameras used and the corresponding
mechanical structure according to the demands of the testing.
The whole inspection system includes mechanical structure parts,
visual electronic hardware and AI inspection system software,
defects rejection device and counting device. The entrance and exit
of the detection system can be integrated according to the
customer's on-site conveyor line. The equipment can realize 7*24
hours of operation, which greatly improves production efficiency.
Inspection Content
The pharma bottle inspection system is equipped with 6 sets of
industrial cameras to inspection the areas such as the bottle lip,
bottle body, and outside of bottle base. Considering the
compatibility of the bottle, the mechanical structure adopts screw
adjustment, and manual assistance is required to adjust the camera
aperture when necessary. The front end of the detection system can
be equipped with a bottle unscrambler, and the back end can be
connected with a packer (bottle unscrambler and packer are
purchased by the customer, or can be purchased by our company).
| Model | Number of camera | Inspection scope | Inspection content | Detection precision | accuracy | capacity |
| KVIS-B-SC06 | 1Set | Bottle lip | black spot＞0.2mm | 99% | 150/min | The capacity depending on the testing samples |
| (burr,flash)＞0.5mm | 99% |
| 1Set | Bottle base | black spot＞0.2mm | 99% |
| burn spot＞0.5mm | 99% |
| 4Set | Bottle body | black spot＞0.2mm | 99% |
| yellow spot＞0.5mm | 99% |
- The software is the core control platform of the equipment, and its
specific functions are as follows:
- Turn on and turn off the inspection function
- Test index parameters, precision adjustment.
- Template sampling and storage, sample detection information storage
and recall.
- Calibrate camera picture function.
- System real-time production information (qualified rate, total
output, speed, etc.) display, historical production information
browsing, export and storage functions.
- Perform authority management according to the login account (for
example, the general operation user disables the parameter
adjustment authority)
- Operation and adjustment of the mechanical part of the system (such
as: opening the transmission device, adjusting the air valve
injection time, and adjusting the alarm signal).
- Customized function
Machining Process
