ATEX Approvad Professional Explosion-proof Fluorescent Light 9W 18W
IP65 Feature: 1. Optional lamp brands of different prices: Foshan, Op, etc.
2. The ex proof fluorescent lighting has fine workmanship and
consists of the following parts:
Built-in copper wire: good thermal conductivity, safe and durable
PS stripe lampshade: high light transmittance, anti-corrosion and
waterproof
LED tube: high-brightness energy-saving LED tube, long life
Flame-retardant lamp feet: easy to install and safe to use
ABD base: flame-retardant, compressive and wear-resistant
Cold-rolled paint board: high temperature resistance, heat sink
3. Emergency functions and accessories can be added Electrical DataEx Marking | Ex nR IIC T6 Gc/Ex tD A21 IP66 T80℃ | Classification | Group II, Catogory 2 GD; Class I, Division 1 and 2,Group A,B,C,D; | IP Degree | IP65 | Corrosion Resistant | WF2 | Rated Voltage | 220VAC/50~60HZ | | Mounting Styles | Pendant; Ceiling; Chain; Embedded; Wall; Stanchion | | Size | L1350* W145 For Single L1350*W210 For Double | Battery Back-up | Optional, Emergency time>90min;Charging time:24h;Starting
time:0.3s | Use Palce | Gas Station,Chemical Industry,factory,gas/chemical
Industry,Platform |
Operation precautions:
1. Don't switch explosion-proof and anti-corrosion fluorescent
lamps too frequently;
2. If the voltage is very low, the two stages of the lamp will emit
tungsten at the beginning of lighting, which will cause a lot of
dot-shaped pollutants inside the lamp, which will become one of the
reasons for the damage of the lamp. Therefore, it is recommended to
Turn on the lights under high voltage conditions;
3. Explosion-proof and anti-corrosion fluorescent lamps have many
lines and need auxiliary devices, so they must be used in
conjunction with corresponding transformers, capacitors, etc. to
ensure that the lamp is started to a suitable power;
4. Pay attention to maintain a ventilated environment, not only to
take away the dust, but also to reduce the temperature of the lamp,
so as to extend the life of the lamp.
FAQ: 1. Can I have a sample order for light?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 10-15days for
order quantity
3. Do you have any MOQ limit for light order?
A: Low MOQ, 1pc for sample checking is available
4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping also optional.
5. Can you accept put my logo on light product?
A: Yes. Please inform us formally before our production and confirm
the design firstly based on our sample.
6: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
7: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less than 0.2%. Secondly,
during the guarantee period, we will send new lights with new order
for small quantity. For defective batch products, we will repair
them and resend them to you or we can discuss the solution
including re-call according to real situation. |
