15-20 Minutes Rapid Antigen Test Home Kit Neutralizing Antibody

iiLO 99% Accuracy SARS-CoV-2 Antigen Home Test Set Neutralizing Antibody 1 test/box

COVID-19 Antigen Test Procedure

Twist off the cap of the buffer bottle, carefully dispense all buffer into the extraction tube.

After collecting upper respiratory sample with nasal swab, insert the swab into the extraction tube, plunge the swab up and down in the fluid for a minimum of 10 seconds. Hold the swab against the bottom of the tube, rotate three turns. DO NOT splash liquid out of the tube.

Remove the swab while squeezing the sides of the tube to extract the liquid from the swab.

Press the nozzle cap firmly onto the extraction tube. Mix thoroughly by swirling or flicking the bottom of the tube.

Gently squeeze the tube’s rigid body, dispense two (2) drops of the buffer-specimen mixture into the sample well on the coronavirus antigen test cassette.

Read the test results between 15 and 20 minutes. Do not read the results after 20 minutes.

Description

SARS-CoV-2 Antigen Test is intended for use by clinical laboratory personnel specifically instructed on in vitro diagnostic procedures. The SARS-CoV-2 Antigen Test is only for use under the Food and Drug Administration’s Emergency Use Authorization.

Date sheet

Advantages of Antigen Rapid Test

Although the development cycle of antigen detection is relatively long, its
1.Sensitivity and specificity are higher than antibody detection
2.The pathogen can be detected at the initial stage of infection
3.Short TAT and simple operation.
4.No professional technicians and equipment are required, and the test can be completed in 15 min.
5.Home use.
6.Personal test.