| X-ray tube | Target: Cu,Fe,Co,Cr,Mo,W (Metal or Ceramic optional ) |
| Focus size: 1*10mm2 or 0.4*14mm2 |
| Rated power:2.4kw or 2.7 kw |
| X-ray generator (PLC Control) | Maximum output power: 4kw high frequency high voltage generator |
| X-ray tube voltage:10~60kv, 0.1kv/step |
| X -ray tube current: 5~80mA, 0.1mA/step |
| Output stability ≦0.05% (mains fluctuation ±10%) |
| Goniometer | Goniometer structure: vertical goniometer θs-θd (sample fixed) scanning radius: Standard 225mm (185- 300mm continuously adjustable |
| Scanning range: -35°~160° |
| Scan speed: 0.0012°~120°/min |
| Positioning speed: 1500°/min |
| Drive mode: θs-θd linkage, θs or θd single |
| Scan mode: Stepping, continuous, segmentation, transmission
scanning |
| Minimum step angle: 0.0001° |
| measurement accuracy: ≦0.001° |
| 20 angle repeatability: 0.0001° |
| Record control unit (detector) | Detector Type: SDD or SC |
| Maximum linear count rate: 1X107cps,( noise≤0.2cps) |
| Energy resolution: SC ≤50%,PC ≤2 |
| Working mode: PLC automatic control differential, integral mode
conversion |
| PLC automatically performs PHA dead time correction |
| Detector high voltage 0~2200VDC continuously adjustable |
| Voltage stability: 0.005% |
| Safety protection alarm type | KV and mA are too high or too low, overload protection, no water
alarm, X-ray tube over-temperature and other multiple protection,
to prevent radiation leakage, protective door interlock protection
and platform lead shielding protection. |
| X-ray leakage stability Dimensions (main body | ≦0.1 µSv/h (maximum power of X-ray tube, without subtracting the
background) |
| ≦0.3% (40kV, 40mA, continuous operation for 8 hours) |
| 1300mmx1000mmx1800mm (length * width* height) |
