Anesthetic Workstation X50-12.1" TFT touch screen, with rotary
knob. Resolution 800 X 600. Suitable for pediatric and adults Tidal volume setting Optional 20~1500ml(optional 10-1600ml) Friendly user interface Sufficient modes of Ventilation: VCV, PCV, SIMV-V, Manual Gas supply: O2 , N2O, Air Optional: SIMV-P , CPAP/PSV , PRVC, SIMV-PRVC, BACKUP , O2 , ETCO2
, AGSS , Suction,AA 6 Tubes flowmeter more accurate and stable, auxiliary flowmeter Gas
system, Hypoxic guard system, ORC, O2, Flush Vaporizer: Selectatec bar support 2 vaporizers ACGO, 2 Yokes (O2 & N2O) 12.1" TFT touch screen, with rotary knob. Resolution 800 X 600. System Specifications | System Specifications | | Description | Technical parameters | | Machine | | Size | 1410 × 950 × 650 (H × W × D) | | Weight | Approximately 110kg | | Maximum bearing weight of the top cover | 30kg | | Display | | Type | Color TFT (touch screen) | | Size | 12.1 inches | | Resolution | 600 × 800 pixels | | Brightness | Not adjustable | | LED indication | | Alarm Indication | 8 (yellow, red, and when the senior and mid-level alarms occur
simultaneously, only red flashes on priorty) | | AC power indicator | 1 (green) | | Battery indicator | 2 (green and orange) | | Audio instruction | | Speaker | Alarm sounds, tone ,volume adjustable,alarm tone meet IEC60601_1_8
standards. | | Control | | Knobs | 1, Support clockwise / counterclockwise rotation and pressing
operation | | Button | 4, Alarm pause, alarm reset, standby, back to the main screen. | | Interface | | Power supply | An AC power connector Three auxiliary output power interface | | Equipotential | An equipotential ground | | USB | 1 standard USB interface | | Moving means | | Roller | 4 castors, diameter 125mm | | Brake castors | Two lockable front casters | | Toolbox | | Drawer | 200 × 392 × 398 (H×W×D) | | Respiratory System | | Bellows capacity | 1500mL | | Absorber canister capacity | 1500mL | | Connection | Suction / ACGO ports: standard OD 22mm, ID 15mm, tapered connector;
Exhalation ports: standard OD 22mm, ID 15mm, tapered connector.
Manual breathing bag port: diameter 22cm | | System leaks | The system is not greater than 100ml/min leakage in any mode | | System compliance | The loss due to the system’s internal compliance gas volume (manual
mode)as follows: | | Adult mode | ≤ 4 mL / cmH2O, | | pediatric mode | ≤ 3 mL / cmH2O | | Resistance | Inspiratory < 0.6 kPa; Expiratory < 0.6 kPa | | Real-time clock | | Range | 2000 (00:00) ~ 2100 (23:59) | | Accuracy | ± 1 minute | | Display Resolution | 1 minute / month(at 21±3℃ under the conditions) | | Use the Power | Independent power (Button battery)supply | | Vaporizer | | Technical Specification | | Flow range | 0.2-15L/min | | Connector type | Selected compatible, plug in, cage mount | | Dosing methods | Pour-fil, Easy-fil, Quick-fil (Sevoflurane) | | Working environment | | Working temperature | +15℃ ~ +35℃ | | Relative humidity | ≤93% | | Atmospheric pressure range | 70kPa ~ 106kPa | | Storage temperature | -40℃ ~ +65℃ | | Anesthetic Concentration: | | | 0~5.0%: | Isoflurane, Enflurane, Halothane | | 0 ~ 8.0%: | Sevoflurane | | Main technical parameters | | Basic function | Disply:12” TFT, Touch screen Tidal Volum:20－1500ml(optional 10-1600ml) Fresh gas compensation pre-use check, Leakage testing and compliance compensation Electronic PEEP | | Wave form | | Loop | P-V,V-F,P-F | | Paw-T, Flow-T,V-T | | Optional | CO2-T ,Pleth ,AG | | Trend | | 24hours | Gas supply Pressure Monitoring | Gauge-Pipeline supply: O2, N2O, Air Optional :gauge-cylinder: O2, N2O(configured with Yoke option ) | Monitoring Parameter | Tidal Volume, MV, Frequency, I:E, Airway Pressure , Compliance,
Resistance.(optional :EtCO2,FiCO2,PHASEIN gas module for anesthetic
agent) | | Application | Adult , pediatric and Infant | | Vaporizer | two position | | Gas supply | O2, N2O, Air | Alternate O2(safety flow ) | Range:0 to 15 L/min Indicator : flow tube Indicator accuracy :±10% | | Fresh gas flowmeter &mixer (electronic automatic control) | | O2 | 0~15LPM | | N2O | 0~12LPM | | Air | 0~15LPM | | Flow accuracy | ±10% of setting ±0.1/min | | O2 concentration range | 21% to 100% O2 concentration | | Accuracy | ±5% | | Electronic mitting compensation | 0.5s(10%-90% flow step) | | Compensation | Temperature and atmospheric pressure compensated to standard
conditions of 20C and 1013kpa | | Hypoxic guard | Electronic | | FiO2% | O2sensor | | Auxiliary O2 supply | O2 Flow meter (O2: 0～15LPM) (Optional) | | ACGO | Yes(optional) | | Battery | NI-MH battery build in.>90mins | | Yoke | Optional:O2, N2O | | Cycle Absorber | Intergrade, bypass Design, heating system. | | Setting Parameter | | Description | Parameter | | Tidal Volume | 20～1500 mL(optional 10-1600ml) | | Frequency | 1～100 bpm | | Tinsp | 0.1～10.0s | | I:E | 4:1～1:10 | | Pause | 0～60% | | PEEP | OFF, 3～30 cmH2O | | Psupp | 0～70 cmH2O | | Pressure Control | 5～70 cmH2O | | Flow Trigger | 0.5～20 L/min | | Pressure Trigger | 0～20 cmH2O | | Ramp | 0～2s | | Expiratory Trigger | 5~80% | | Monitoring Parameter | | Description | Parameter | | Tidal Volume Inspiration | 0～2500 mL | | Tidal Volume Expiration | 0～2500 mL | | MV | 0～60 L/min | | MVspont | 0～60 L/min | | Frequency | 0～100 bpm | | Ratespont | 0～100 bpm | | I:E | 9:1～1:99 | | Ppeak | 0～100 cmH2O | | Pmean | 0～100 cmH2O | | PEEP | 0～100 cmH2O | | Pplat | 0～100 cmH2O | | Pmin | -20~100 cmH2O | | O2% | 15～100% | | Compliance | 0～300 mL/cmH2O | | Resistance | 0～600 cmH2O/(L/s) | | EtCO2 (Optional) | 0～13.3 % | | FiCO2 (Optional) | 0～13.3 % | | Anesthetic agent | Massimo gas module for anesthetic agent | | Flow trigger | 0.5~20L/min | | Pressure trigger | 0~20cmH2O | | Ramp | 0~2s | | Expiratory | 5~80% | | Alarm Parameter | | Description | Parameter | | Tidal Volume | | Upper limit | 30～2000 mL | | Lower limit | OFF, 20～1500 mL | | MV | | Upper limit | 1～99 L | | Lower limit | 0～98 L | | O2% (Optional) | | Upper limit | 22～100%,OFF | | Lower limit | 20～99% | | Airway Pressure | | Upper limit | 10～99 cmH2O | | Lower limit | 1～98 cmH2O | | Frequency | | Upper limit | 1～100 bpm | | Lower limit | 0～99 bpm | | EtCO2 (Optional) | | Upper limit | 0.1～13.3 % ; | | Lower limit | 0～13.2 %; | | Environment specification | | Description | Parameter | | Work environment | | Temperature | 10-40℃ | | humidity | 5~95%,non-condensing | | Environmental Pressure | 50~106kpa | | Storage environment | | Temperature | -20-55℃ | | humidity | 10~95%,non-condensing | | Environmental Pressure | 50~106kpa | | Power Specifications | | Description | Parameter | | External AC power | | Input Voltage | 100 - 240V | | Input Frequency | 50/60Hz | | Input Power | <150 VA | | Internal Battery | | Number of batteries | A battery pack | | Battery Type | Nimh batteries | | Rated battery voltage | 12VDC | | Battery capacity | 4200mAh | | Shutdown Delay | Less than 10min | | Charging time | 4h |
About us
Beijing Siriusmed Medical Device Co., Ltd is among the top level
Manufactures of anesthesia machine and ventilators in China since
2013. Our main products are: Anesthesia machine, vaporizer, ICU
Ventilator, neonatal ventilator, and air compressors. With the
quality certificates of NMPA, ISO 13485, CE and BGMP, we offer the
whole OR & ICU solutions to the world. Right now we established
the long term ditributors, OEM & SKD partners in Germany, UK,
U.S. India, Brazil, Morocco ... etc more than 80 countries in the
world. Welcome to join us for the long term cooperation for our
products: anesthesia machine, anestheisa ventilator, vaporizer,
ventilator, air compressor and monitors... etc. |
