CLRC63201T RFID READER IC 13.56MHZ 32SO ISO Integrated circuits CLRC63201T0FE112
|
|
CLRC63201T RFID READER IC 13.56MHZ 32SO ISO Integrated circuits CLRC63201T0FE112
ISO Integrated circuits CLRC63201T0FE112 Description: RFID Reader IC 13.56MHz ISO 14443, ISO 15693, MIFARE SPI 3.3V ~ 5V
Environmental & Export Classifications
ISO Integrated circuits CLRC63201T0FE112 Description: RFID Reader IC 13.56MHz ISO 14443, ISO 15693, MIFARE SPI 3.3V ~ 5V
The CLRC632 is a highly integrated reader IC for contactless communication at 13.56 MHz. The CLRC632 reader IC provides: • outstanding modulation and demodulation for passive contactless communication • a wide range of methods and protocols • a small, fully integrated package • pin compatibility with the MFRC500, MFRC530, MFRC531 and SLRC400 All protocol layers of the ISO/IEC 14443 A and ISO/IEC 14443 B communication standards are supported provided: • additional components, such as the oscillator, power supply, coil etc. are correctly applied. • standardized protocols, such as ISO/IEC 14443-4 and/or ISO/IEC 14443 B anticollision are correctly implemented
Specification:
Electronic payment systems Identification systems Access control systems Subscriber services Banking systems Digital content systems
General information:
Highly integrated analog circuitry for demodulating and decoding card/label response Buffered output drivers enable antenna connection using the minimum of external components Proximity operating distance up to 100 mm Supports both ISO/IEC 14443 A and ISO/IEC 14443 B standards Supports MIFARE dual-interface card ICs and the MIFARE Mini, MIFARE 1K, MIFARE 4K protocols Contactless communication at MIFARE higher baud rates (up to 424 kBd) Supports both I-CODE1 and ISO/IEC 15693 protocols Crypto1 and secure non-volatile internal key memory Pin-compatible with the MFRC500, MFRC530, MFRC531 and the SLRC400 Parallel microprocessor interface with internal address latch and IRQ line SPI compatibility Flexible interrupt handling Automatic detection of parallel microprocessor interface type 64-byte send and receive FIFO buffer Hard reset with low power function Software controlled Power-down mode Programmable timer Unique serial number User programmable start-up configuration Bit-oriented and byte oriented framing Independent power supply pins for analog, digital and transmitter modules Internal oscillator buffer optimized for low phase jitter enables 13.56 MHz quartz connection Clock frequency filtering 3.3 V to 5 V operation for transmitter in short range and proximity applications 3.3 V or 5 V operation for the digital module
Images :
|
