12V 2A HGU 2GE 11AC WIFI POTS Xpon Onu With 1 Year Warranty
Product Overview - 2GE WIFI POTS is designed as HGU (Home Gateway Unit) in different
FTTH solutions. The carrier-class FTTH application provides data
and video service access.
- 2GE WIFI POTS is based on mature and stable, cost-effective XPON
technology. It could switch automatically into EPON mode or GPON
mode when access to the EPON OLT and GPON OLT.
- 2GE WIFI POTS adopts high reliability, easy management,
configuration flexibility and good quality of service guarantees to
meet the technical performance of EPON Standard of China Telecom
CTC3.0 and GPON Standard of ITU-TG.984.X
- 2GE WIFI POTS is designed by Realtek chipset 9607C.
Feature - Supports GPON and EPON auto detection
- Support Rogue ONT detection
- Support Route mode PPPoE/DHCP/Static IP and Bridge mixed mode
- Support NAT, Firewall function.
- Support Internet, IPTV and VoIP services automatically bound to ONT
ports
- Support Virtual server, DMZ, and DDNS, UPnP
- Support Filtering based on MAC/IP/URL
- Support SIP protocol for VoIP Service
- Support 802.11 b/g/n, 802.11ac WIFI(2x2 MIMO) function and Multiple
SSID
- Support Flow & Storm Control , Loop Detection and Port
Forwarding
- Support IPv4/IPv6 dual stack and DS-Lite
- Support IGMP transparent/snooping/proxy
- Support TR069 Remote Configuration and maintenance
- Integrated OAM remote configuration and maintenance function
- Compatible with popular OLT (HW, ZTE, FiberHome...)
Product Specifications
| Technical Item | Details | | PON interface | 1 G/EPON port(EPON PX20+ and GPON Class B+)
Upstream: 1310nm; Downstream: 1490nm
SC/UPC connector
Receiving sensitivity: ≤-28dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM | | LAN interface | 2 x 10/100/1000Mbps auto adaptive Ethernet interfaces
Full/Half, RJ45 connector | | WIFI Interface | Compliant with IEEE802.11b/g/n/ac
2.4GHz Operating frequency: 2.400-2.483GHz
5.0GHz Operating frequency: 5.150-5.825GHz
Support 2*2MIMO, 5dBi external antenna, rate up to 867Gbps
Support: multiple SSID
TX power: 11n--22dBm/11ac--24dBm | | POTS Port | RJ11
Max 1km distance
Balanced Ring, 50V RMS | | LED | 8 LED, For Status of PWR,LOS,PON,LAN1,LAN2,2.4G,5.8G,FXS | | Push-Button | 3 button for Function of Power on/off, Reset, WPS | | Operating condition | Temperature : 0℃～+50℃
Humidity :10%～90%(non-condensing) | | Storing Condition | Temperature : -40℃～+60℃
Humidity :10%～90%(non-condensing) | | Power supply | DC 12V/1A | | Power Consumption | <6W | | Net Weight | <0.3kg |
Panel lights and Introduction
| Pilot Lamp | Status | Description | | 2.4G | On | 2.4G WIFI up | | Blink | 2.4G WIFI is sending or/and receiving data (ACT). | | Off | 2.4G WIFI down | | 5.8G | On | 5G WIFI up | | Blink | 5G WIFI is sending or/and receiving data (ACT). | | Off | 5G WIFI down | | PWR | On | The device is powered up. | | Off | The device is powered down. | | LOS | Blink | The device doses not receive optical signals or with low signals. | | Off | The device has received optical signal. | | PON | On | The device has registered to the PON system. | | Blink | The device is registering the PON system. | | Off | The device registration is incorrect. | | LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). | | Blink | Port (LANx) is sending or/and receiving data (ACT). | | Off | Port (LANx) connection exception or not connected. | | FXS | On | Telephone has registered to the SIP Server. | | Blink | Telephone has registered and data transmission (ACT). | | Off | Telephone registration is incorrect. |
Application - Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
- Typical Service:Broadband Internet access, IPV, VOD, video
surveillance
Ordering information
| Product Name | Product Model | Descriptions | | 2G+11AC WIFI+POTs XPON | OP153W-AC | 2*10/100/1000M, 1 PON interface, RJ11 interface, support WIFI
5G&2.4G, plastic casing, external power supply adapter |
FAQ
Q1. ZISA product the quality of products.
A: As the top class total solution provider and productive service
provider, we provide high quality of service to Tier1 Telco
customer and Vendors. With the genius design and software
customization expertise, we can leverage the best service to our
customers. ZISA Product quality is same as Huawei and ZTE, and ZISA
has complete product line.
Flexible , Smart and selective producing system, the top
manufacture in vertical career choose our team, with decade of
global market and professional experience.
Q2. ZISA after-sales service.
A:ZISA has complete software and hardware research and development.
Provide reqiurment development, bug modify and 24h on-line support.
For significant customers, ZISA can send technician to support.
Q3. Ways of cooperation with ZISA.
A :ZISA welcome integrator or agent to agent ZISA product. If agent
has enough advantages in the market, ZISA appoint you ZISA sole
agent.
Q4. About factory visit.
A :ZISA welcome significant customers to visit ZISA factory. Please
make an appointment in two weeks.
Q5. About product pricing.
A :ZISA only publish sample price. The price of different agent and
OEM customer is secret. ZISA gives specific price for significant
projects and customers. Besides, ZISA only provide goods to agent
in agent area.
|
