Product characteristics | Number of inputs and outputs | Number of digital outputs: 2 |
|---|
| Measuring range | | 0...250 bar | 0...3626 psi | 0...25 MPa |
|
|---|
| Process connection | threaded connection G 1/4 external thread (DIN EN ISO 1179-2);
Internal thread:M5 |
|---|
Application | Measuring element | metallic thin film cell |
|---|
| Application | for industrial applications |
|---|
| Media | liquids and gases |
|---|
| Medium temperature [°C] | -40...90 |
|---|
| Min. bursting pressure | |
|---|
| Pressure rating | |
|---|
| Note on pressure rating | |
|---|
| Vacuum resistance [mbar] | -1000 |
|---|
| Type of pressure | relative pressure |
|---|
Electrical data | Operating voltage [V] | 18...30 DC |
|---|
| Current consumption [mA] | < 15 |
|---|
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
|---|
| Protection class | III |
|---|
| Reverse polarity protection | yes |
|---|
| Power-on delay time [s] | < 0.3 |
|---|
Inputs / outputs | Number of inputs and outputs | Number of digital outputs: 2 |
|---|
Outputs | Total number of outputs | 2 |
|---|
| Output signal | switching signal; IO-Link; (configurable) |
|---|
| Electrical design | PNP/NPN |
|---|
| Number of digital outputs | 2 |
|---|
| Output function | normally open / closed; (configurable) |
|---|
| Max. voltage drop switching output DC [V] | 2 |
|---|
| Permanent current rating of switching output DC [mA] | 100 |
|---|
| Switching frequency DC [Hz] | < 170 |
|---|
| Short-circuit protection | yes |
|---|
| Type of short-circuit protection | yes (non-latching) |
|---|
| Overload protection | yes |
|---|
Measuring/setting range | Measuring range | | 0...250 bar | 0...3626 psi | 0...25 MPa |
|
|---|
| Set point SP | | 2.5...250 bar | 37...3626 psi | 0.25...25 MPa |
|
|---|
| Reset point rP | | 1.3...248.8 bar | 18...3608 psi | 0.13...24.88 MPa |
|
|---|
| In steps of | |
|---|
| Factory setting | | SP1 = 62.5 bar | rP1 = 57.5 bar | ou1 = Hno; | | SP2 = 187.5 bar | rP2 = 182.5 bar | ou2 = Hno; | | dS1/dS2 = 0 ms | dr1/dr2 = 0 ms | | | coF = 0 % | P-n = PnP | dAP= 60 ms |
|
|---|
Accuracy / deviations | Switch point accuracy [% of the span] | < ± 0,5 (nach DIN EN 61298-2) |
|---|
| Repeatability [% of the span] | < ± 0,05; (with temperature fluctuations < 10 K) |
|---|
| Characteristics deviation [% of the span] | < ± 0,5; (linearity incl. hysteresis and repeatability, limit
value setting to DIN EN IEC 62828-1) |
|---|
| Linearity deviation [% of the span] | < ± 0,1 (BFSL) / < ± 0,2 (LS) |
|---|
| Hysteresis deviation [% of the span] | < ± 0,2 |
|---|
| Long-term stability [% of the span] | < ± 0,1; (per 6 months) |
|---|
| Temperature coefficient zero point [% of the span / 10 K] | < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C) |
|---|
| Temperature coefficient span [% of the span / 10 K] | < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C) |
|---|
Software / programming | Parameter setting options | hysteresis / window; normally open / closed; switching logic;
switch-on/switch-off delay; Damping |
|---|
Interfaces | Communication interface | IO-Link |
|---|
| Transmission type | COM2 (38,4 kBaud) |
|---|
| IO-Link revision | 1.1 |
|---|
| SDCI standard | IEC 61131-9 |
|---|
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device
Diagnosis |
|---|
| SIO mode | yes |
|---|
| Required master port class | A |
|---|
| Process data analog | 2 |
|---|
| Process data binary | 2 |
|---|
| Min. process cycle time [ms] | 5 |
|---|
| Supported DeviceIDs | | Type of operation | DeviceID |
|---|
| default | 709 |
|
|---|
Operating conditions | Ambient temperature [°C] | -40...90 |
|---|
| Storage temperature [°C] | -40...100 |
|---|
| Protection | IP 67; IP 69K |
|---|
Tests / approvals | EMC | |
|---|
| Shock resistance | | DIN EN 60068-2-27 | 500 g (1 ms) |
|
|---|
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
|
|---|
| MTTF [years] | 667.77 |
|---|
| UL approval | |
|---|
| Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1
fluids on request |
|---|
Mechanical data | Weight [g] | 64.5 |
|---|
| Material | stainless steel (630/1.4542/17-4 PH); stainless steel (1.4404 /
316L); PEI |
|---|
| Materials (wetted parts) | stainless steel (1.4305 / 303); stainless steel (630/1.4542/17-4
PH) |
|---|
| Min. pressure cycles | 60 million; (at 1.2 times nominal pressure) |
|---|
| Tightening torque [Nm] | 25...35; (recommended tightening torque; Depends on lubrication,
seal and pressure rating) |
|---|
| Process connection | threaded connection G 1/4 external thread (DIN EN ISO 1179-2);
Internal thread:M5 |
|---|
| Process connection sealing | FKM (DIN EN ISO 1179-2) |
|---|
| Restrictor element integrated | yes |
|---|
Remarks | Remarks | | BFSL = Best Fit Straight Line | | LS = limit value setting |
|
|---|
| Pack quantity | 1 pcs. |
|---|
Electrical connection | Connection | Connector: 1 x M12; coding: A |
|---|
|
