Fluke 725 High Precision Multifunctional Process Calibrator
Intrinsically product descriptionWith Fluke 725 multifunctional process instrument calibrator, you
can test and calibrate almost all process parameters. It can
measure and output milliamperes, voltages, temperatures (RTD and
thermocouples), frequencies, ohms, and pressure signals (optional
external pressure module is required). Do you need to calibrate the
transmitter? 725's split display allows simultaneous viewing of
input and output. For valve and VP testing, mA can be output while
measuring pressure. The 725 has automatic step and automatic ramp
capabilities for remote testing, and 25% step capability for quick
linearity detection. When you get Fluke 725, you can immediately
put into work. The meter is very simple to control, no menu, easy
to operate. Its storage makes setup faster and very robust. features Fluke 725 Multifunctional Process instrument calibrator is a
powerful and easy to use field calibrator that can be used to test
and calibrate almost any process parameter with its measurement or
output function. - Compact, streamlined design, easy to carry and hold.
- Rugged, reliable and suitable for field use.
- Measurement and output display simultaneously, you can read the
input and output values of the meter at the same time.
- Measurement of volt, milliampere, platinum resistance (RTD),
thermocouple, frequency and ohm functions for testing
sensors/transmitters.
- Output/analog voltage, current, thermocouple, platinum resistance
(RTD), frequency, resistance and pressure to calibrate the
transmitter.
- Use any one of Fluke 700PXX 29 pressure modules to measure/output
pressure.
- MA output while measuring pressure for I/P test and valve test.
- The frequency and count per minute (CPM) function supports flow
meter testing.
- Automatic stepping and ramp output for fast linear detection.
- MA is measured while providing loop power to the transmitter.
- Fast pulse RTD transmitter and PLC can be tested with pulses up to
10 ms fast.
- Backlit display, suitable for use under any lighting conditions.
- Four AA batteries, full of power.
- Battery compartment door for easy battery replacement.
specificationBrand name | Fluke | Model | 725 | Product name | process calibrator | direct voltage | 0~10V | direct current | 0~24mA | frequency | 1CPM~10kHZ | Working Temperature | -10 °C ~ +55 °C | Power | Electronic | Resistance Sources outpu | 3200 ohm | Voltage DC sources outpu | Resistance Sources outpu | Size | 130 x 236 x 61 mm | Weight | 0.65 kg |
From the moment you pick it up, the Fluke 725 is ready to perform
as a powerful, yet easy-to-use field calibrator. Its simple
controls, without menus, make operation easy and the backlit
display provides better visibility in poor light. It features a
small, streamline shape and a rugged, reliable design that make it
ideal for standing up to harsh field conditions. Versatile troubleshooting tool Power transmitters during test using the loop supply with
simultaneous mA measurement so you can test a transmitter out of
circuit and better isolate problems. The 725 can also test a
variety of fast pulsed RTD transmitters and PLCs (Programmable
logic controllers), with pulses as short as 10 ms. Source mA with simultaneous pressure measurement to conduct valve
and I/P (Input current/Output pressure) tests in a single device.
You can also test flow meters with frequency and CPM (counts per
minute) functions and perform fast linearity tests with auto-step
and auto-ramp features so you can quickly verify the mA signal at
different output levels.
|