SGS Certified Badminton Racket Binding Machine Multi Function

Pro Design Durable Stringing Machine For Badminton Racket Use

Function

1. Intelligent computer automatic pound correction

2. Stable constant pull function.

3. Self-Checking

4. Store memory function, can set 4 groups of data

5. Pulse width modulate, variable speed can be available,protecting the string from hurting when the string is in tension.

6. 4 groups of pre-stretch,suitable for different string

7. Sensor automatic string control,improving stringing speed and avoid breakdown

8. Three gears for speed

9. Knot and pound increasing set,automatically reset after knot

10. Three gears of voice

11. The voltage is 100-240V,suitable for any countries.

12. LB and KG transfer function.

13. Pound adjust function,minitrim 0.1LB.

14. Stringing head has the string protection system,which can be adjusted according to the stringing route.

15. Full set of tools for free

How to make racket stringing?

The first step to get a racket is to check the racket, whether there is paint peeling, whether the racket frame is worn, and use your experience to make a proper judgment on the number of pounds that the racket can withstand, whether it can be high pounds, The paint peeling and wear on the frame should be pointed out in advance to avoid unnecessary trouble.
When the racket is on the stringing machine, the handle logo is upward, which many people tend to ignore. As a stringer, you should learn as much as you can about the performance of each racket. Whether it is offense, balance or defense. The characteristics of each string. Each person's style of play, ability, so that the racket and string can be combined through the most suitable pounds.

Test Racket

1. New racket; check whether the surface of the racket is in good condition, whether the accessories are intact or whether there are any hidden quality problems.
2. Old shot; it is necessary to check whether the protective rubber particles are damaged and whether the frame is cracked.
3. Fixed pound; see if the pound required by the customer exceeds the pound guaranteed by the manufacturer on the label.
4. Cut the line; for a racket with a broken line, please cut the line that intersects with the line of the broken line first, so as to ensure that the racket is restored to its original state, and then cut first.
(Vertical 1, Horizontal 11, Vertical 1, Horizontal 12, need to be cross-cut at the same time), and finally cut in sequence: Vertical 2, Horizontal 10, Vertical 2, Horizontal 13, Vertical 3