GJ0002L 11X23 Medium wave twin tube infrared lamp clamp with stainless steel

CLAMPS FOR MEDIUM WAVE TWIN LAMPS

Operating Instructions

The infrared twin-tube emitter is suited for horizontal operation only. Special IR emitters for vertical installation positions are specially manufactured and marked as such.

To install our IR emitters, usually one mounting and one spring clamp, and if necessary, one or several central supports all manufactured by HNI are to be used.The IR twin-tube emitter must be secured in position of a stable support(steel support plate: > 1.5 mm).

The IR emitter(s) must be assembled in the following order:

1. Drill mounting holes with Φ9.2 mm for clamp.Spring in the support (mounting plate)at distance L.
2.Screw the clamp spring in place with ceramic washers (1) on the mounting plate (4).

3.Press the IR emitter into position in the retaining spring clip. The emitter must point at all the surface to be heated. The gold reflector should be pointing towards the support plate.
4.Tighten the fastening nuts (2) on the knurled nut (3).

Pulling the lead wire must not cause any tension on the press seal. Bending radius of lead wire: > 30 mm

Mounting dimensions:
L = Overall length of emitter LG:2x35 mm (two-sided connection) or
L = Overall length of emitter LG:35 mm -20 mm (one- sided connection)

If the following overall emitter lengths are exceeded for LG, a central support is necessary:
Tube dimensions:23 x 11, LG >1 500 mm and tube dimensions 34x14, LG > 2000 mm

After installation, the quartz glass tube of the IR emitter must be cleaned on the side without gold plating. For this purpose, please use the cleaning cloth included in our delivery or a clean linen cloth (without textile finishing agents) soaked in methylated spirit (such as rubbing alcohol) to remove any impurities/soiling or fingerprints from the surface.

Other IR Holder parameter:

Application:

After Sales Service

1. Package tracking

2. Technical support

3. 24 hours working time

4. Discount for reorder

5. Replacements for quality problems

6. Confidentiality of customer information

Our Services & Strength

 * Expert sales teams are responsible for accurate communication.

* Professional technical teams are responsible for new product development.

* Technical production teams are responsible for assembly line production.

* Expert quality inspection teams are responsible for quality inspection.

* Experienced after-sales teams are for all customers.

FQA

1.Are you a factory or trading company?
We are a professional factory.

2.Where is your factory located?How can I visit there?
Our factory is located in JiangMen City,Guangdong Province,China,You can fly to GuangZhou BAIYUN airport directly,Warmly welcome
all the clients at home and broad to visit us!

3. Can I get some samples?
We are happy to offer samples for you to check and test.

4.Do you have any MOQ limit?
Low MOQ,1pcs for sample checking is available.

5.What about the lead time?
15days after receive your payment.

6.How does your factory do regarding quality control?
"Quality is priority."UVIR people always attaches more importance to QC from the very begining to the very end.Our factory has
gained CE,ISO9001,RoHS,SGS authentication.

7.About customized service?
We can provide right heat solution for you and offer OEM services, we can print your logo on your product as your requirements.

8.About after-sale service?
Any quality issue, once confirmed, we will compensate our customer.