High-Speed 1.2m/S 12G Collar Flat Knitting Machine Computer Controlled

Fully automatic high-speed 12G computer-controlled collar flat knitting machine

PRODUCT DESCRIPTION:

The tension control device of the Flat knitting machine should be sensitive and easy to adjust；The line strands are evenly arranged；uniform weaving density； The drive system of the equipment runs smoothly；Each wire wheel of the loose-band knitting machine is resistant to wear and tear, and has no jamming or pinching；Low weaving disconnection rate； 

A flat knitting machine is a two-bed machine. The most important mechanical features of a flat knitting machine are the supporting frame, the yarn feeding system, a transmission system, a fabric takedown motion, a central programming unit, and a needle-bed racking system.

PRODUCT FEATURES:

PRODUCT DETAILS

Guide rail: The guide rail is made of castings or special steel. It is fastened to the frame with fixing screws. Generally, there are two front and rear, which are the rails for the machine head. There is a yarn feeder guide above the rear guide rail, which is mainly used for It is used when the yarn feeder moves smoothly left and right with the random head or when changing the yarn feeder.

Rack: There are two hills, and two beams connect the hills into a whole, which is a casting. A wrench, a wrench fixing screw, a needle support plate screw, and a needle support plate screw compression spring are installed on the rack.

Needle plate: The steel plate is obtained by refining and heat treatment of high-quality steel, with considerable wear resistance and rust resistance. Slotted holes are milled, and there are large bead, small bead, machine needle, tofu block and fixing screws.

Faucet: the heart of the flat knitting machine, the parts of the whole machine head are installed on it, its parts include front and rear faders, pusher coke balls and screws, pusher sliders, and bearings are installed on the sliders. The front part of the faucet is equipped with a three-eye cover. The screw that passes through the three eyes is a needle-pulling triangle pull rod. The screw in the center eye is called a live-heart pull-rod screw, a pull-rod well ring and a needle-pulling triangle wrench, a live chicken heart wrench, and a machine head.

The scale plate on the surface is called the scale plate, the small green pressure plate is installed on the scale plate, and the screw in the center of the scale plate is called the two-head screw. The lower ends of the two screws are fastened to the big triangle, the center of the two screws is equipped with a pointer, and the pointer is equipped with an ingot screw. A shuttle rack is installed behind the faucet, and the shuttle rack is equipped with a swing rod and a shuttle rod, and a latch switch is also installed at the back of the machine head. The main part above the machine head is the flower plate.

Flower plate: The flower plate is the center of the flat knitting machine. It has a base plate seat and a panel structure. All triangles are installed on the base plate seat. The triangles on the flower plate include needle triangle, chicken heart triangle, herringbone triangle, and big triangle.

Yarn feeding part: used to convey wool yarn for weaving.

Lead frame part: used to thread the wool yarn output from the bobbin, which can eliminate or reduce the tension fluctuation of the wool yarn, and ensure that the two edges of the fabric are tightly and evenly stitched. It consists of thread take-up spring, adjusting nut and disc tensioner. The elastic force of the thread take-up spring is controlled by the pressing nut, and the clamping force of the disc tensioner is controlled by the adjusting nut.

Pulling mechanism: It adopts heavy hammer pulling, which is used for weaving middle opening and pulling fabric.

Notice:Do not mix the original machine needles with other types of needles on one machine!

APPLICATION FIELDS

FAQ
Q1: Supplier Profile
A2: We are a flat knitting knitting machine manufacturer since 2002, with more than 60 professional technicians and many agents around the world, the machines are exported to more than 40 countries such as India, Bangladesh, Mexico, the United States, etc.

Q2: Product introduction
A2: This machine is suitable for the production of collars, sweaters, hats, scarves and other textiles. Just design the pattern computer in the software, input the pattern to the machine via USB, and you can knit anything you need.

Q3: Machine warranty
A3: One year. For any accessories of the machine, customers can buy from us.

Q4: Delivery time
A4: Usually 15~30 days after payment, depending on the number of machines and the order of the factory at that time. If the machine you need is in stock, we can ship it quickly.

Q5: How do you ship the goods and how long does it take to arrive?
A5: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.

Q6: Machine package
A6: The inner layer is plastic packaging to avoid dust; the middle layer is vacuum packaging to avoid moisture and rust during shipping Shipping; exterior is wood packaging and iron underframe to protect the machine during shipping

Q:7Can the machine be customized?
A7:Yes, we can customize according to your needs, please confirm the details with us in advance before purchasing.

Q8: After-sales service
A8: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, During the warranty period, if there is any problem with the accessories, we will send it to the customer for free (the courier fee needs to be borne by the customer); after-sales services can be provided (the customer needs to bear the travel expenses of the after-sales personnel).If the product is outside the warranty period, we can provide video assistance services, and if there is a problem with the accessories, we sell it to the customer at the cost price