56inch 7G Computerized Flat Bed Knitting Machine Simple Double System

High Quality dual system 56inch 7G TWH computerized knitting machine

PRODUCT DESCRIPTION:

Flat knitting is one of the most versatile textile techniques. The machines used today range from manual machines to highly complex electronic machines. Each type of machine has its advantages and disadvantages. A wide variety of products, from scarves to hats and shoe uppers to delicate sweaters and technical items, can be produced using the flat knitting technique.
The flat knitting technology adds the textile design to the creation of apparel. Along with this comes the need of special know-how of the technology when going beyond plain basic shapes and workmanship. Even with basic designs, special treatments of the knitted goods and special machines for sewing have to be used.

PRODUCT FEATURES:

PRODUCT DETAILS

Rack: There are two hills, and two beams connect the hills into a whole, which is a casting. A wrench, a wrench fixing screw, a needle support plate screw, and a needle support plate screw compression spring are installed on the rack.

Needle plate: The steel plate is obtained by refining and heat treatment of high-quality steel, with considerable wear resistance and rust resistance. Slotted holes are milled, and there are large bead, small bead, machine needle, tofu block and fixing screws.

Guide rail: The guide rail is made of castings or special steel. It is fastened to the frame with fixing screws. Generally, there are two front and rear, which are the rails for the machine head. There is a yarn feeder guide above the rear guide rail, which is mainly used for It is used when the yarn feeder moves smoothly left and right with the random head or when changing the yarn feeder.

Faucet: the heart of the flat knitting machine, the parts of the whole machine head are installed on it, its parts include front and rear faders, pusher coke balls and screws, pusher sliders, and bearings are installed on the sliders. The front part of the faucet is equipped with a three-eye cover. The screw that passes through the three eyes is a needle-pulling triangle pull rod. The screw in the center eye is called a live-heart pull-rod screw, a pull-rod well ring and a needle-pulling triangle wrench, a live chicken heart wrench, and a machine head. The scale plate on the surface is called the scale plate, the small green pressure plate is installed on the scale plate, and the screw in the center of the scale plate is called the two-head screw.

The lower ends of the two screws are fastened to the big triangle, the center of the two screws is equipped with a pointer, and the pointer is equipped with an ingot screw. A shuttle rack is installed behind the faucet, and the shuttle rack is equipped with a swing rod and a shuttle rod, and a latch switch is also installed at the back of the machine head. The main part above the machine head is the flower plate.

Needle slot in the long-term use, there will be fouling in the channel, it directly affects the quality of knitwear, it must be on a regular basis to wipe the needle bed work. Known as wiping the car, wiping the car must pay attention to the following points:
1, the knitting needles all pushed to the weaving area, to prevent damage to the tongue in the plunger on the pull.
2, out of the upper and lower plunger and needle bar iron must press the original order, put on the workbench, do not make mistakes, easy to install.
3, if the needle bed rust, available 0 emery cloth sanding sliver, avoid scratching the needle bed grating tooth mouth, so as not to damage the tooth mouth straightness.
4, should not be in the ferry's "front" to wear wipe cloth, so as not to "front" destruction and affect the needle operation.
5, needle groove must be clean, otherwise it will cause fabric thinning needle or road and other flaws.
Eliminate needle slot fouling, you can use the back of the broken hacksaw to tick, such as a tick unclear, you can check again, to achieve clean so far, and then remove the brush with grease dust. Do not for the sake of convenience, the needle bed turned over and hit, so as not to damage the needle bed.
6, when cleaning the car should pay attention not to damage the needle bed razor-tooth mouth.

Notice:Do not mix the original machine needles with other types of needles on one machine!

APPLICATION FIELDS

FAQ
Q1: Supplier Profile
A2: We are a flat knitting knitting machine manufacturer since 2002, with more than 60 professional technicians and many agents around the world, the machines are exported to more than 40 countries such as India, Bangladesh, Mexico, the United States, etc.

Q2: Product introduction
A2: This machine is suitable for the production of collars, sweaters, hats, scarves and other textiles. Just design the pattern computer in the software, input the pattern to the machine via USB, and you can knit anything you need.

Q3: Machine warranty
A3: One year. For any accessories of the machine, customers can buy from us.

Q4: Delivery time
A4: Usually 15~30 days after payment, depending on the number of machines and the order of the factory at that time. If the machine you need is in stock, we can ship it quickly.

Q5: How do you ship the goods and how long does it take to arrive?
A5: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.

Q6: Machine package
A6: The inner layer is plastic packaging to avoid dust; the middle layer is vacuum packaging to avoid moisture and rust during shipping Shipping; exterior is wood packaging and iron underframe to protect the machine during shipping

Q:7Can the machine be customized?
A7:Yes, we can customize according to your needs, please confirm the details with us in advance before purchasing.

Q8: After-sales service
A8: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, During the warranty period, if there is any problem with the accessories, we will send it to the customer for free (the courier fee needs to be borne by the customer); after-sales services can be provided (the customer needs to bear the travel expenses of the after-sales personnel).If the product is outside the warranty period, we can provide video assistance services, and if there is a problem with the accessories, we sell it to the customer at the cost price