Removable Acrylic Adhesive Black Ultra High Gloss Car Wrap humidity resistant

 Product Name: High Gloss Black Car Wrap Film Air Release Slideable

 Product Description:

• Car wrap film is a series of vinyl decals that are placed over the body panels of the vehicle, letting you drastically change its appearance. The design options include a standard glossy color, gradient color, matte finish, chrome metallic color, and full-on graphics treatments.
• These films have a slideable and repositionable pressure-sensitive adhesive with non-visible air release channels for virtually no air bubbles.

Product Specfications:

Product Features:

• Good conformability to irregular substrates
• Outstanding durability and outdoor performance
• Exceptional durability and performance
• Very high gloss semi-conformable film
• UV, temperature, humidity, and salt-spray resistance
• Unique patented adhesive technology

 Advantages of Applying Car Wrap Film:

• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
• The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
• You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
• Matte-paint jobs can be brittle and chip easily, while vinyl is more durable and harder to scratch. In the event that repairs are needed, the part that was damaged can be easily replaced, providing a perfect match.
• Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
• It’s difficult to tell it’s not painted.
• Hides scratch, small chips, and “freshens” the look of your vehicle.
• Vinyl car wraps protect your OEM paint and are 100% removable.
• Many of the styles can not be reproduced by paint.

  FAQs:

• Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.

• How to remove vinyl from your car?

1. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

4. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

• How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.