Volcanic Ashk High Gloss Car Wrap Film Scratch Resistant Custom
|
Product Name: Volcanic Ash vinyl Super Gloss car wrap scratch resistant custom
Bubble Free Slideable High Gloss Volcanic Ashk Car Wrap Film Scratch Resistant Custom Product Description:
Product Specfications:
Product Features:
Advantages of Applying Car Wrap Film:
Product Application:
FAQs:
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
1. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
2. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
3. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: Volcanic Ashk High Gloss Car Wrap Scratch Resistant High Gloss Car Wrap |
![]() |
Air Release Sunflower Yellow High Gloss Car Wrap Film Slidable |
![]() |
Space Grey Vinyl High Gloss Car Wrap Film 60µm grime resistant |
![]() |
Midnight Blue 140gsm High Gloss Car Wrap Vinyl Block Ultraviolet Light |
![]() |
Polymeric Calendered Air Bubble Free Vinyl Wrap ultra gloss green car wrap |
![]() |
High Gloss Rose Red Car Wrap Slidable Air Release Vinyl Wrap UV Resistant |
![]() |
water resistant Bubble Free Pink High Gloss Car Wrap Vinyl 5 Years Durability |