Moon Lime high gloss vinyl wrap scratch resistant vinyl wrap Waterproof

 Product Name:  High Gloss Moon LimeCar Wrap Film Air Release Slideable

 Product Description:

Car wrap film is a series of vinyl decals that are placed over the body panels of the vehicle, letting you drastically change its appearance. The design options include a standard glossy color, gradient color, matte finish, chrome metallic color, and full-on graphics treatments

Product Specfications:

Product Application:

￭ Buses

￭ Trailers

￭ Trucks

￭ Vehicle advertising

• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Adds to the resell value of your car. When you remove it, your paint is in the same condition as on the day it was wrapped. Thus adding to the resale value by having flawless paint on your car. A repainted car normally decreases the value of your vehicle due to concerns over possible previous accident(s).
• Hides scratch, small chips, and “freshens” the look of your vehicle.
• It’s difficult to tell it’s not painted.
• Vinyl car wraps protect your OEM paint and are 100% removable.
• You can restore the car to its original color by removing the wrap.
• The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
• Many of the styles can not be reproduced by paint.
• Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.

Product Features:

• Unique patented adhesive technology
• Outstanding durability and outdoor performance
• Excellent conformability around curves and recesses
• Good conformability to irregular substrates
• Very high gloss semi-conformable film
• UV, temperature, humidity, and salt-spray resistance
• Combines a colored film and protective layer in one convenient construction with fewer seams

  FAQs:

• How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

• Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.

• How to remove vinyl from your car?

1. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

4. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.