Protective Cement Ash High Gloss Car Wrap Salt Spray Resistant Bubble Free

 Product Name:Slideable Bubble Free High Gloss Cement Ash Car Wrap Film

 Product Description:

Car wrap film is a series of vinyl decals that are placed over the body panels of the vehicle, letting you drastically change its appearance. The design options include a standard glossy color, gradient color, matte finish, chrome metallic color, and full-on graphics treatments

Product Features:

• Exceptional durability and performance
• Very high gloss semi-conformable film
• Excellent conformability around curves and recesses
• Good conformability to irregular substrates
• UV, temperature, humidity, and salt-spray resistance
• Easy apply feature helps eliminate wrinkles and bubbles during application
• Combines a colored film and protective layer in one convenient construction with fewer seams

Product Specfications:

Product Application:

￭ Emergency Vehicles

￭ Vehicle advertising

￭ Cars & Vans

￭ Trucks

  FAQs:

• How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

• How to remove vinyl from your car?

1. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

4. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

• How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.

• Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Matte-paint jobs can be brittle and chip easily, while vinyl is more durable and harder to scratch. In the event that repairs are needed, the part that was damaged can be easily replaced, providing a perfect match.
• Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
• You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
• Adds to the resell value of your car. When you remove it, your paint is in the same condition as on the day it was wrapped. Thus adding to the resale value by having flawless paint on your car. A repainted car normally decreases the value of your vehicle due to concerns over possible previous accident(s).
• It’s difficult to tell it’s not painted.
• Hides scratch, small chips, and “freshens” the look of your vehicle.
• Vinyl car wraps protect your OEM paint and are 100% removable.
• Many of the styles can not be reproduced by paint.
• You can restore the car to its original color by removing the wrap.
• Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.