Environmental Testing Walk-in Large Sand And Dust Test Chamber 19.8m³

Environmental Testing Walk-in Large Sand And Dust Test Chamber 19.8m³​

Complied Standards & Clauses

 
IEC 60068-2-68: 2001 Environmental testing- Part 2: Tests- Test L Dust and sand.
 
Product Overview

1. The equipment is a walk in structure with spliced warehouse boards. There is a funnel in each of the four corners. The middle flat adopts a dust brush structure. The side-through dust brush structure brushes dust into the funnels on both sides.

2. There is a rotating sand and dust feeding device at the air inlet end of the working room to meet the needs of dust blowing.

3. The circulating air duct is equipped with a heating and dehumidification device.

4. There is an observation window on the door. The test box has double doors and is sealed with double layers of aging-resistant silicone rubber.

5. The outer wall material of the test room and whirlpool duct is made of high-strength double-sided galvanized steel plate with fine powder baking paint on the surface. The inner wall is processed and formed by SUS304 stainless steel plate. The frame is made of 10# square tube after anti-rust treatment and spraying.

6. Temperature and humidity control uses an intelligent controller (relative humidity uses a direct-reading sensor) (panel control uses a touch screen).

Technical Parameters