IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³

Browse Categories

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:+86-020-39185976

Contact Person:
Ms.Zoe Zou View Contact Details

IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³

Brand Name	Sinuo
Model Number	SN886-6800
Certification	Calibration Certificate (Cost Additional)
Place of Origin	China
Minimum Order Quantity	1
Payment Terms	T/T
Supply Ability	10 Sets Per Month
Delivery Time	30 Days
Packaging Details	Export packing
Effective volume	6.8m3
Temperature range	-50℃~+180℃
Humidity fluctuation	≤±2.0%R.H
Humidity range	20%～98%RH
Heating rate	2℃/min (no load, average)
Cooling rate	2℃/min (no load, average)
External dimensions Approx.	220022003200mm(WHD)
Inner box dimensions	200018001900mm(WHD)

Detailed Product Description

IEC60068-2-30 Walk-in Constant Temperature -and Humidity Test Chamber 6.8m³

Complied Standards & Clauses

Conforms to:

IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”

IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”

IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”

Product Overview

The walk-in constant temperature and humidity test room is suitable for safety performance testing, reliability testing, product screening testing, etc. of electronic components. At the same time, through these tests, the reliability of the product is improved and the quality control of the product is carried out.

The walk-in constant temperature and humidity test room is an essential test equipment in the fields of aviation, automobiles, home appliances, scientific research, etc. Sample range: electrical, electronic, semiconductor, communication, optoelectronics, electrical appliances, automotive electrical appliances, materials and other products. This equipment is used to assess and determine the parameters, performance, and adaptability of the above samples after the high and low temperature and humidity tests with rapid changes in temperature environment.

It is suitable for schools, factories, military industry, research and development and other units.

Technical Parameters

1.1 Model and Purpose

1.1.1 Product model

Walk-in Constant Temperature And Humidity Test Chamber SN886-6.8m³

1.1.2 Purpose

It is suitable for schools, factories, military industry, research and development and other units.

1.2 Volume and Size
1.2.1 Effective volume	6.8m³
1.2.2 Inner box dimensions	W: 2000 mm H: 1800 mm D: 1900 mm
1.2.3 External dimensions Approx.	W: 2200 mm H: 2200 mm D: 3200 mm

1.3 Performance (ambient temperature -5℃~+28℃, no-load condition)
1.3.1 Temperature range	-50℃~+180℃
1.3.2 Heating rate	about 2℃/min (no load, average)
1.3.3 Cooling rate	about 2℃/min (no load, average)
1.3.4 Resolution accuracy	0.01℃	Data measured under no-load conditions
1.3.5 Temperature fluctuation	±0.5℃
1.3.6 Temperature deviation	±2.0℃
1.3.7 Humidity range	20%～98%RH
1.3.8 Humidity deviation	Below 75%RH: ≤±5.0%RH Above 75%RH: ≤+2/-3%R.H
1.3.9 Humidity fluctuation	≤±2.0%R.H
1.3.10 Temperature and humidity control capability range diagram
1.3.11 Power supply	AC3￠5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤ ±10%)
1.3.12 Power	The total power of the equipment is about 25KW
1.3.13 Noise	Measured according to GB/T14623-2008, the noise level is ≤75dB (the noise detection device is measured at a distance of 1m from the equipment door).
1.3.14 Standards	IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
1.3.15 Energy-saving design	The PLC (Programmable Logic Controller) of the control system is used. The operating conditions of the refrigerator are automatically adjusted according to the test conditions. The refrigeration system can adjust the power according to the load size. It also has compressor energy regulation technology. It can achieve excellent energy-saving effects.
1.3.16 Cooling method	The equipment adopts water cooling (Water tower, water pump)

Details

Product Tags: Constant Temperature and Humidity Test Chamber Temperature And Humidity Test Chamber Walk in Temperature And Humidity Test Chamber

Related Products

-40°C Environmental Chamber Constant Temperature Humidity Test Chamber for sale


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³

IEC60068-2-30 Walk-in Constant Temperature And Humidity Test Chamber 6.8m³

-40°C Environmental Chamber Constant Temperature Humidity Test Chamber

EV Connector Durability Test Machine Static Force Test Machine for EV Connectors

EV Plug Tensile Test Equipment Universal Testing Machine for EV Connector

Constant Temperature and Humidity Chamber 20m³ Programmable Climate Chamber

Explosion-proof Walk-In High and Low Temperature Humidity Test Chamber

Customizable Temperature And Humidity Walk-in Climate Test Chamber