IEC60068-2-30 Walk-in Humidity And Temperature Controlled Chamber 22m³

Browse Categories

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:+86-020-39185976

Contact Person:
Ms.Zoe Zou View Contact Details

IEC60068-2-30 Walk-in Humidity And Temperature Controlled Chamber 22m³

Brand Name	Sinuo
Model Number	SN881-22m³
Certification	Calibration Certificate (Cost Additional)
Place of Origin	China
Minimum Order Quantity	1
Price	Customized
Payment Terms	T/T
Supply Ability	10 sets/month
Delivery Time	45 days
Packaging Details	Export packing
Temperature uniformity	≤2℃
Effective volume	22m³
Humidity control accuracy	+/- 3%
. Temperature control accuracy	+/- 0.5C
Temperature range	10°～ 80℃
Humidity range	20%-90%RH
Inner box size	W4500 mmH2270 mmD2200mm
Outer box size	W5100 mmH3700 mmD2800 mm

Detailed Product Description

IEC60068-2-30 Walk-in Humidity and Temperature Controlled Chamber 22m³

Complied Standards & Clauses

IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”

IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”

IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”

IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”

Product information:

This equipment is suitable for environmental simulation reliability tests of various electrical and electronic products and other products, parts and materials, such as constant high and low temperature, gradual change, and cycle tests.

Safety test restrictions:

A) Test and storage of samples of flammable, explosive and volatile substances

B) Test of corrosive substance samples,test and storage of biological samples

C) Test and storage of strong electromagnetic emission source samples

Technical Parameters

Product name	Walk-in Constant Temperature and Humidity Test Chamber
Mode	SN881-22m³
Effective volume	22m³
Inner box size	W4500 mmH2270 mmD2200mm
Outer box size	About W5100 mmH3700 mmD2800 mm(Excluding unit size) Reminder: Please refer to the final design and confirm the three views for the external dimensions
Performance
Cooling method	Water cooling
Temperature range	10°～ 80℃
Humidity range	20%-90%RH
Temperature /humidity fluctuation	±2℃ / ±2.0%RH
Temperature control accuracy	+/- 0.5C
Humidity control accuracy	+/- 3%
Temperature uniformity	≤2℃
Heating time	From 10°C to 80°C, full-scale non-linearity averages about 2K/minute without load
Cooling time	From 80°C to 10°C, full scale non-linearity averages about 2K/minute without load
Temperature rise and fall overshoot	≤±1℃
Schematic diagram of temperature and humidity	PS: Standard humidity 20%~95%HR
Structure and material
Outer box material	Adopt advanced cold and hot steel plate non-static nano-baking paint
Inner box material	SUS304 stainless steel plate
Thermal insulation materials	High temperature and fire-resistant rigid polyurethane foam
Door frame sealing strip	Silicone rubber sealing strip
Chamber door	Double-leaf doors open outside, the door frame and the edge of the door panel are equipped with electric heating devices and overflow ditch
Electric heating glass observation window	Quantity: 2 Location: On the door of the test room (or the place designated by the customer) Form: 3-layer vacuum strengthened glass with built-in anti-fogging heating element
Lighting	High and low temperature resistant explosion-proof energy-saving lamp
Pressure balance port	All aluminum alloy with anti-sweat line 4 sets of self-resetting pressure windows
Weight bearing	Laboratory load: 500KG
Sample hole	A hole with a diameter of φ100mm on the left side chamber wall and equipped with a rubber isolation plug and a rubber cover at the same time.
Non-slip floor	The floor adopts a 4.0mm stainless steel non-slip design to prevent personnel from being injured during internal operations.
Drainage	The floor is designed with a drainage tank, and the test chamber has no water inside after the end of high temperature and humidity test
Foot cup	The foot cup of the electric box adopts silica gel pad to absorb shock and protect the compressor and copper pipe welding
Noise of the whole machine	≦80dB
Air conditioning system
Constant temperature method	Adopt cold balance method
Air cooling method	Cascade compressor refrigeration
Circulating motor	Taiwan Tatung Low Voltage Induction Motor
Sensor	With temperature and humidity measurement sensor and controller PT100 platinum resistance sensor
Wind wheel	Multi-wing centrifugal circulating fan, high and low temperature resistant aluminum alloy blade
Refrigerating system
Cooling method	Original imported cascade silent type, high efficiency and energy saving compressor
Compressor	Original imported German Bitzer semi-hermetic compressor. 2 sets of 6HP compressors
Refrigerant	Non-fluorine environmental protection HFC404A (Honeywell) and DuPont R23 refrigerant
Condenser	High-efficiency shell and tube type (water cooling) Equipped with cooling water tower (well-known brand) and pipeline
Evaporator	High-efficiency multi-section fin evaporator with hydrophilic membrane (thickened fin)
Oil separator	Emerson AW
Expansion valve	Danfoss Thermal Expansion Valve
Solenoid valve	Japan Saginomiya and Danfoss
Other accessories	All high-quality products of the first international brand (pictured on the right: drying filter)
Dehumidification	Freezing and dehumidifying by the refrigeration system (the air in the box passes through the evaporator below the dew point temperature, and water is precipitated). *Choose evaporator fins with hydrophilic membrane treatment, better dehumidification performance, because the water tension of the hydrophilic membrane aluminum fins is small, the water droplets from air condensation are easy to slip off, and it is not easy to produce obstructive water bridges in the fin gap. Thereby greatly improving the dehumidification efficiency!
Heating and humidification system
Heating method	Electric heating
Steam supply method	Open direct injection, the inside of the generator is directly connected to the test chamber, keeping the internal pressure close to zero
Heating tube	Stainless steel finned nickel-chromium alloy electric heating tube, heating tube anti-MC adhesion design, heater connection, heat-resistant wire is used, the heater is placed in the circulating air duct on the top of the box, and fire-resistant and heat-insulating materials are added around it
Humidification tube	A) The humidification cylinder (boiler method) is used for humidification, which is faster than the traditional surface humidification (water pan type) and has higher control accuracy. In the box It will not produce impurity pollution such as scale, has good low-humidity performance, and is easy to clean. B) The humidification tube adopts all stainless-steel seamless casing, the insulation resistance is greater than 50MΩ, and has a dry-burn prevention controller C) The humidification cylinder is made of stainless steel and has a water level observation window. D) Low temperature with dry air
Humidification boiler	Installed inside the machine room
Humidification water treatment	Equipped with a dedicated water softening device, which can effectively remove impurities in the water (1 set of pure water recovery system device, with activated carbon filter to filter water impurities).
The main components of the control circuit	The main components of the control circuit are all high-quality brands

Details

Product Tags: 22m³ Temperature Controlled Chamber IEC60068-2-30 Temperature Controlled Chamber

Related Products

-40°C Environmental Chamber Constant Temperature Humidity Test Chamber

EV Connector Durability Test Machine Static Force Test Machine for EV Connectors

EV Plug Tensile Test Equipment Universal Testing Machine for EV Connector

Constant Temperature and Humidity Chamber 20m³ Programmable Climate Chamber

Explosion Proof Walk-In Environmental Test Chamber For Battery Testing 8.36m³

Automotive Parts Environmental Testing Walk-in Environmental Test Chamber 18 M³

Email to this supplier


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!