IEC 61851 Electric Vehicle EVSE Test Equipment Mechanical Strength Impact Tester

IEC 61851 Electric Vehicle Supply Equipment EVSE Mechanical Strength Impact Test Equipment
 
Complied Standards & Clauses

 
This mechanical strength inpact test equipment complied to IEC 61851-1 2017 clause 12.11 standards.
 
Technical Parameters

Equipment Overview

 
1. Main purpose: This device is composed of two kinds of impact test apparatuses, and two kinds of mechanical strength test methods can be used to perform impact test on EVSE shell.
 
2. Installation sample: installation of a single sample is less than 1min
 
3. Applicable sample size:
Minimum (length × width × height, unit mm): customized according to the sample
Maximum (length × width × height, unit mm): customized according to the sample
 
4. The impact energy is formed by releasing the pendulum through the electromagnet; and it has automatic electric brake to prevent secondary impact;
 
5. The equipment is controlled by PLC, controlled by touch screen and remote control, and the height of the strike point can be adjusted by electric lift;
 
6. The adjustment of the striking height and the release of the striking element can be controlled remotely
 
7. The sample mounting seat is welded by high-strength steel plate and channel steel, which has the characteristics of high strength and impact resistance. The sample to be tested is fixed with a manual screw rod.