Solar Radiation Metal Halide Xenon Aging Test Chamber UV IEC 60068-2-5

Browse Categories

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:+86-020-39185976

Contact Person:
Ms.Zoe Zou View Contact Details

Solar Radiation Metal Halide Xenon Aging Test Chamber UV IEC 60068-2-5

Brand Name	Sinuo
Model Number	SN8816
Certification	Calibration Certificate (Cost Additional)
Place of Origin	China
Minimum Order Quantity	1
Payment Terms	T/T
Delivery Time	60 days
Supply Ability	10 sets/month
Packaging Details	Plywood case
Price	Customized
Applied standard	IEC60068-2-5, MIL-STD810D, etc.
Light source	Metal halide lamp
Lamp power	4KW
Lamp lifetime	About 500 hours
Total irradiance	1120 W/m2±10% W/m2
Filter type	Sunlight filter
Chamber Temperature range	RT+10～70℃
Water Spray Cycle	18min/102min

Detailed Product Description

IEC 60068-2-5 Solar Radiation Metal Halide Lamp Aging Test Chamber

Complied Standards & Clauses

The Solar Radiation Test Chamber is designed and manufactured according to the standard requirement of IEC60068-2-5:2010, MIL-STD-810, DIN 75220 and etc.

Equipment Overview

The test chamber is mainly used to test the aging of automobiles, coatings, rubber, plastics, pigments, adhesives chemicals, fabrics, aerospace, naval vessels, electronics industry, packaging industry, and etc. by exposing the material sample to the light and heat radiation of the metal halide lamp.

It stimulates the full sunlight spectrum of halide lamp to reproduce the destructive light waves under different environment, which focuses on accelerating the photochemical effect of solar radiation. It can be used to detect the impact of long-term solar radiation on equipment, which can provide corresponding environmental simulations and accelerated tests for scientific research, product development and quality control.

This equipment can be used to select new materials, change existing materials, or evaluate changes in durability after changes in material composition. It can well simulate changes in materials exposed to sunlight under different environmental conditions.

Technical Parameters

Internal chamber size	1000×1000×1000mm(WDH) Or can be customized
External chamber size	Approx. 1620×1600×2250mm(WDH) subject to actual size
Spectral energy distribution	Spectral range		Ultraviolet rays A	Ultraviolet rays B	Visible light	Infrared	Total radiation
	Wavelength range		300-320nm	320-400nm	400-800nm	800-2450nm	300-2450nm
	Radioactivity		4.06W/ m²	70.5W/ m²	604.2 W/ m²	186W/ m²	1090W/ m²
	Percentage		0.4%	604%	55.4%	3708%	100%
Number of tubes		Metal halide lamp: 1PC； Power: 4KW
Total irradiance		280～3000nm; 1120 W/m²±10% W/m²
Lamp lifetime		About 500 hours
Filter type		Sunlight filter
Internal chamber temperature range		RT+10～70℃
Temperature heating/cooling rate		Heating or cooling at a rate of 1℃/min
Black standard temperature range		40℃～100℃, adjustable(light cycle)；25～85℃(dark cycle)
Thermometer		Black standard thermometer BST
Temperature accuracy		±0.1℃
Temperature fluctuation		±0.5℃
Temperature variation		±3℃
Humidity range		30%～98%RH (in light off); 20%～60%RH(in light on)
Humidity accuracy		±1%RH
Humidity fluctuation		±3%RH
Humidity variation		≤±5%RH
Photoperiod time		1S～999H59M59S, continuous photoperiod time can be adjustable
Rainfall time		1S～9999min, continuous rainfall time can be adjustable
Rainfall cycle		1～240min interval (off) rainfall cycle time can be adjustable
Water spray cycle		18min/102min or 12min/48min (water spray time/non-water spray time)
Spray pressure		0.12～0.15Mpa
Nozzle aperture		Ф0.8mm
Door sealant		Silicone rubber tight sealing device
Sample holder material		SUS304 stainless steel
Internal chamber material		SUS304 stainless steel
External chamber material		Cold rolled plate with stoving vanish
Protection System		Over-temperature protection, leakage, short-circuit, phase-loss protection, buzzer alert when the test time is up
Environmental conditions		Temperature 5℃～28℃; relative temperature ≤85％RH; atmospheric pressure 86kPa～106kPa
Power supply		AC380V±10% (three-phase five-wire, make a 63A air switch separately, the air switch must have wiring terminals, and the power cord must be more than 6 square meters; 50±10%; 16KW).

Product Tags: IEC xenon aging test chamber automobiles xenon aging test chamber IEC 60068-2-5 uv aging chamber

Related Products

Compound Salt Spray Test Chamber Corrosion Test Equipment 1m³ Salt Fog Chamber for sale


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

Solar Radiation Metal Halide Xenon Aging Test Chamber UV IEC 60068-2-5

Solar Radiation Metal Halide Xenon Aging Test Chamber UV IEC 60068-2-5

Compound Salt Spray Test Chamber Corrosion Test Equipment 1m³ Salt Fog Chamber

-40°C Environmental Chamber High and Low Temperature Test Chamber

Thermal Cycling Test Chamber Cold and Heat Climatic Test Chamber 4000L

-30℃ Programmable Temperature and Humidity Chamber Environmental Test Chamber

Thermal Shock Test Chamber For Rapid Temperature Change Testing IEC 60068-2-14

High Temperature Electronic Components Drying Oven Laboratory Heating Oven