Quality Control
The company has a comprehensive and effective management system, and has passed ISO9001, CE and other certifications, from market service, material testing, planning, technical design, material supply, product manufacturing, after-sales service, logistics supply and safety assurance and other links are closely linked. Effectively ensure the completion of the project with high quality and high efficiency.
| The design and manufacture comply with following ISO or FEM/DIN standards: |
| GB/T 3811-2008 |
Design rules for cranes |
| GB6067.1-2010 |
Crane machinery safety procedures |
| GB/T14405-2011 |
General overhead crane |
| GB/T104406-2011 |
General gantry cranes |
| GB/T10183-2005 |
Tolerance of Overhead crane and gantry crane manufacuturing and rails installation |
| GB/T5905-1986 |
Crane testing rules and process |
| JB/T4315-1997 |
Crane Electrical control equipment |
| Gb8918-2006 |
Wire rope for cranes |
| GB/T700-2006 |
Carbon structural steel |
| GB/T1591-2008 |
Low-Alloy High-Tensile Structural Steel |
| JB928-1994 |
The standard of Radiographic inspection for weld joint |
| GB11345-1989 |
Manual ultrasonic testing method |
| FEM 1.002 |
Illustrated Terminology of Heavy Lifting Equipment |
| FEM 9.811 |
Rope and Chain Hoists – General Specifications |
| FEM 9.511 |
Rules for the Design of Series Lifting Equipment - Classification of Mechanisms |
| FEM 9.661 |
Rules for the design of Series Lifting Equipment - Dimensions and Design of Rope Reeving Components |
| FEM 9.683 |
Selection of Hoist and Travel Motors |
| FEM 9.852 |
Power Driven Series Hoist Mechanisms, Standardized Test Procedure for Verification of the Classification |
| FEM 9.755 |
Measures for Achieving Safe Working Periods for Motorized Serial Hoist Units (S.W.P.) |
| FEM 9.751 |
Power Driven Series Hoist Mechanisms, Safety |
| FEM 9.901 |
Rules for the Design of Series Lifting Equipment and Cranes Equipped with Series Lifting Equipment |
| DIN EN 14492-2 |
Cranes – Power Driven Hoists |
| DIN EN 60204-32 |
Safety of Machinery; Electrical Equipment of Machines; Requirements for Hoisting Machines |
| DIN 3051-Sections 1–4 |
Lifting Ropes; Steel Wires |
| DIN 15017 |
Cranes & Hoists; Principles of Motor and Gear Sizing |
| DIN 15020- Sections 1–2 |
Hoists; Principles of Rope Reeving |
| DIN 15061- Sections 1–2 |
Cranes & Hoists; Grooves for Rope Sheaves & Drums |
| DIN 15100 |
Serial Lifting Equipment; Nomenclature |
| DIN 15400 through DIN15414 |
Detailed Aspects of Load Hooks and Bottom Block Construction |
Certifications
|
| Standard: |
|
| Number: |
|
| Scope/Range: |
|
| Issued By: |
|
|
|
| Standard: |
|
| Number: |
|
| Scope/Range: |
|
| Issued By: |
|
|
Certifications
CATET Machinery Co.,Ltd
Tel:188-3619-0888-18836190888
Fax:86-755-23343104
Contact Person: Mr.kalai
Other Products
