High Precision Helium Leak Detection Equipment with Iridium Ion Source

Technical Parameters of SFJ-231 Helium Leak Detector:

Helium Leak Detection for Power Plant Steam Systems (Using Wayeal SFJ-231)
Sealing integrity in power plant steam systems (e.g., turbines, steam pipelines, valves, and heat exchangers) directly impacts unit efficiency and operational safety. Even minor leaks can cause steam loss, reduced thermal efficiency, corrosion, or unplanned shutdowns. The Wayeal SFJ-231 helium mass spectrometer leak detector delivers precise, reliable detection for these critical applications.

Leak Detection Method (Vacuum Mode)
1. System Preparation

• Isolate the steam system and evacuate it to ≤1500 Pa (maximum allowable detection pressure).
• Connect the SFJ-231’s DN25KF leak detection port to the test point.

2. Helium Spraying

• Use a helium spray gun (compatible with H2/He3/He4) to slowly spray potential leak points (welds, flanges, etc.).
• The dual ion sources (iridium-coated yttrium oxide) auto-switch for real-time monitoring.

3. Leak Identification

• Monitor real-time graphs/bar charts on the 7-inch color LCD touchscreen:
• Audible/visual alarms trigger if leak rate exceeds 5.0×10^-6 Pa·m³/s (sniffer mode threshold).
• Vacuum mode detects ultra-fine leaks (as low as 5.0×10⁻¹³ Pa·m³/s).

4. Data Recording

• Export results via RS232/485 or USB to MES systems for compliance reporting.
• Recheck & Maintenance

5. Recheck & Maintenance

• Retest after repairs to confirm leak rates meet standards.
• Clean ion sources post-use to prolong lifespan.