3.7V 12800mAh Lithium Ion Batteries 18650 For The Face Recognition Devices

3.7V/ 12800mAh High quality lithium ion batteries (18650)

support charge for the face recognition devices

Operation guidance
1. Power ON and OFF
ON: Push switch to “I” position to make power on
OFF: Push switch to “O” position to make power off

2. Capacity display(Fuel Gauge): There are four power indicators, push switch to “I” position to make battery power on, power and capacity indicator lights will be lighted.

How to charge the power bank
1. Connect AC-DC charger to power socket(100-240V available)
2. Connect power bank to AC-DC charger .
3. Push switch of power bank to “I” position to make charging circuit breakover.
4. The led indicator of AC-DC charger show RED means charging process going.
The led indicator of AC-DC charger show GREEN means charging process completed.
5. The led indicator of AC-DC charger will change from red to GREEN while the
power bank be 95% of full charged.
6.Full charge time(estimated)=Capacity of power bank / output current of charge0r.

How to charge other devices(LED light / panel / strip, CCTV, IP CAMERA, AMPLIFIER, etc.)
1. Connect devices to power bank via lead wire of double male DC connector
2. Push switch of power bank to “I” position to make circuit breakover

Accessories
1. PB120B1 or PB120B2 power bank
2. Power Cable
3.12.6V 2A Lithium ion battery charger

Charging status
Charge power bank
Red indicator of AC-DC charger on: Charging process
Green indicator of AC-DC charger on: Power bank be full charged.