Finished Battery Pack Testing Machine 100V 120Amp Battery Load
Tester
Product Description
The comprehensive tester for finished batteries is a device for
quickly and accurately testing the performance of finished
lithium batteries. The main test items are: open circuit voltage,
AC internal resistance, discharge test, discharge overcurrent test,
short circuit protection test, charge test, charge protection test,
resistance test. The system adopts a 32-bit ARM processor, voltage
and current adopts a 16-bit AD converter. Compared with similar
equipment, the test speed is faster and the test accuracy is high.
It supports simultaneous operation of multiple devices. Widely used
in automotive
electronics, aerospace, shipbuilding, solar storage, electric
bicycles, electric motorcycles, backup power batteries,
communication power supplies and other power battery pack
production and scientific research experiment testing.
Product Features
1.7.2V-85V test open circuit voltage, peak current 100A
2. Try charging voltage test
3. Charging current test
4. Internal resistance test
5. Discharge current test
6. Load voltage test
7. Overcurrent current test
8. Overcurrent recovery voltage test
9. Set aside time
10. Setting of discharge time and current
11. Overcurrent protection delay time setting
12. Over current step current setting
Product Specification
Battery TesterZTW52 | Range | Minimum resolution | Precision:±(% Reading + number) |
Single voltage | 0-4.999V | 1mV(0.001V) | ±(0.03% + 2 ) |
Dual voltage | 0-9.999V | 10mV(0.01V) | ±(0.05% + 3 ) |
Essential resistance | 0—999 mΩ | 1 mΩ | ±(0.1% + 2 ) |
Short retention period | 0-99.9 ms | 0.1 ms | ±(1% + 3 ) |
Identification resistor | 0-999.9 KΩ | 0.1KΩ | ±(1% + 3 ) |
Charge and discharge current | 50—2000 mA | 1 mA | ±(0.5% + 5 ) |
Single-section overdischarge current | 0-8.00A | 10mA(0.01A) | ±(1% + 5 ) |
Overdischarge current | 0-19.99A | 10mA(0.01A) | ±(1% + 5 ) |
Capacity | 0—9999 mAh | 1mAh | ±<3% |
