18650 Battery Cell Sticking Machine 800W 4000 Pcs/H Speed

Description

The Battery Sticking Machine is mainly used for puching and sticking protection film, like barley paper, on cylindrical cell positive pole.
Why need sticking machine?
The battery pasted with insulating paper to avoid short circuit of the battery itself or short circuit of the battery pack during the assembly process, which may burn out the protection circuit or components, and damage the human body in the worst case.
Commonly used are barley paper, fast red bar, PVC and so on. Barley paper has good insulation, water resistance and abrasion
resistance, which can effectively prevent the positive and negative poles of the power battery pack from short-circuiting during vibration.
Usually need to paste the insulation protection position:
1. Between the contact surface of the BMS board and the battery cell: the paper is required to completely cover the contact surface of the BMS board and the battery to avoid short circuit of the battery;
2. Protect the overlap position of the different polarities of nickel strips, pads, traces and plugs and leads on the BMS board: insulation is required to completely cover the contact surface that can cause a short circuit between the two to avoid short circuit of the battery;
3. When the batteries are connected in series, the joint insulation pads should be attached to the series end, and then the nickel strip should be spot-welded in series to prevent the positive pole cell in the series from short-circuiting;
4. When the battery cells are connected in parallel, the positive pole of the battery should be attached to the barley paper device. The positive pole of the battery cell should be attached to the joint insulation pad. The positive pole of the battery can be attached to the barley paper device, and then the nickel strip can be connected in series to prevent the battery itself from short-circuiting.
How sticking machine works?
The sticking machine is controlled by microcomputer to complete the test and sorting of stepping motors and cylinders, and realize the function of sticking barley paper to qualified cells. The number of finished cylindrical cells is about 4000 per hour. The mechanical structure design is simple and generous, and the system performance is stable. In the current market, one of the most cost-effective cylindrical battery sticking barley paper equipment so far.

Features

1) Design for cylindrical (18650, 21700...) battery barley paper sticking.
2) Suitable for battery pack assembling factory.
3) Good sticking quality, standard, beautiful appearance, no fall off.
4) 7.0-inch touch screen, PLC programming is easy to operate, comes with fault alarm, can clear the fault according to the prompt.
5) Large-capacity battery feeder, can put 500 cells in one time
6) Scraping material collecting system.

Structure

Details

Parameters

Our project

India project
This project is localed in Inda, Gurgaon. The client was founded in 1994, have more than 400 staffs and 10000+ square factory.

They bought 2 full of battery pack assembly line from us, includes sorting machine, welding machine, sticking machine, charge and discharge machine…
We have sent 3 engineers to client site for machine installation and training in year of 2019. The training taked about one week. After the training, the client engineers are learned how to operation the machines in a smooth and high efficiency way. They made high-quality products by our machines.
We had a nice journey in India.