One Way Sprag Clutch Bearing Freewheel CSK30-2RS
|
|
One Way Sprag Clutch Bearing Freewheel CSK30-2RS
Production introduction
Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40).
It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm.
All the CSK versions are equipped with “formchromed” sprags. This process increases several times the overrunning life time.
Torque transmission is ensured by a press fit assembly into a rigid outer housing with N6 tolerance, and onto a shaft with n6 tolerance.
The initial bearing radial clearance is set at C5, and is reduced if using the press fit as specified.
CSK..2RS is 5 mm wider but is equiped with lip seals to be water splash resistant.
The use of additional “nylos” type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible.
Note: 1) T max = 2 × T KN
Mounting example:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: One Way Sprag Clutch Bearing Sprag Clutch Bearing Freewheel CSK30-2RS One Way Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
One Way AA Bearing AA55 (GC-D55160) Roller Type Freewheel Backstop Clutch |
|
AA Series AA30 One Way Roller Type Bearing Backstop Freewheel Clutch From Changzhou Factory |
|
Complete Freewheel One Way Clutch Bearings FND442Z FND Series |
|
FND 470Z Complete Freewheel One Way Clutch Bearings Backstop Clutch |
|
FND 459 Z One Direction Bearing Auto Clutch With Complete Freewheel One Way Clutch Bearings |
|
FND Series Complete Freewheel FND459Z FND 459 One Way Clutch Bearings Backstop Clutch |

