High Precision Water Turbidity Sensor DST420 Water Quality Testing Device 1000NTU
|
|
High-precision Turbidity Meter Air Formaldehyde Tester Water Formaldehyde Tester Water Quality Testing Device Product Description Principle Our turbidity sensors use fiber optic technology to provide
superior repeatability and stability, and are less susceptible to
ambient light. The automatic cleaning brush with the sensor can
effectively eliminate air bubbles and reduce the influence of
contamination on the measurement. It has a longer maintenance
period and maintains excellent stability for long-term online use. InstallBefore installation, please check the appearance of the cables for damage, and disperse the cables. 1. When using the throw-in sensor, avoid the sensor hitting the wall or other facilities caused by water flow. If the water flow rate is too fast, the sensor must be fixed. 2. There should be no obstructions in front of the measurement. For example, fluorescence sensors should be avoided from light. 3. The water depth position where the sensor is installed should not exceed 2 meters from the horizontal, and the installation should be based on the fluctuation of the water flow. The water depth of the location should not be less than 30 cm. (Adjustable according to the measured water body) 4. The sensor should be installed in a location where there is no air bubbles to prevent air bubbles from affecting the measurement data of the sensor. 5. Do not use the sensor's own cable to hoist the sensor, and install a cable protection device to prevent excessive tension between the cable and the sensor, causing the cable to break. 6. The sensor should not be installed with the measuring side facing upwards, it can be installed vertically downwards or horizontally. 7. If you use this product in the water diversion tank, please consult the company's sales staff to confirm the specific installation requirements. Technical parameter Application
Packing & Delivery Our Company
Xi'an Desun Uniwill Electronic Technology Co., Ltd. was established
in March 2019,registered capital of 5 million,and is located in
Xi'an High-tech Development Zone. Relying on the abundant
university resources in Xi'an, it has carried out technical
cooperation with many universities and scientific research
institutions, and is committed to monitoring the water environment. The company is a high-tech company integrating production, R&D,
sales, after-sales service and engineering services.
Multi-parameter water quality sensors (five parameters / seven
parameters), optical dissolved oxygen, fiber turbidity,
four-electrode conductivity, blue-green algae, chlorophyll, water
oil and COD have been introduced. Widely used in water
environmental protection, sewage treatment, industrial process
monitoring, aquaculture, groundwater monitoring, water plants,
petrochemical enterprises, small and medium-sized environmental
protection companies, food fermentation and pharmaceuticals.
Through water environment monitoring equipment, water quality can
be monitored more effectively during processing, discharge and
recycling. Our Service * Standardized workshop and process |
| Product Tags: High Precision Water Turbidity Sensor Water Turbidity Sensor DST420 Water Quality Testing Device 1000NTU |
|
River Monitoring online Turbidity Sensor Probe IP68 MODBUS Protocol |
|
Self cleaning Water Turbidity Sensor 3000 NTU POM Minimal Maintenance |
|
Portable Water Turbidity Sensor For Turbidity Content High Range 4000NTU |
|
Customized 12V Water Turbidity Sensor SS316 Online Turbidity Meter |
|
High Sensitivity Digital Turbidity Meter Wastewater Treatment Water Quality Tester |
|
High Precision Water Turbidity Sensor 1000NTU Total Suspended Solids |