Vibroflot Compaction is a deep compaction technique for densifying
granular soils with less than 10 –15% silt present. This method is
popular for improving reclaimed land. Under the influence of
simultaneous vibration and
saturation, loose sand and or gravel particles are repacked into a
denser state and lateral confining pressure within the soil
mass is increased.The Vibroflot is normally suspended from a
standard crawler crane or a piling rig.
| Max rotation speed | 1200-1800rpm |
| Working pile diameter | 900-1200mm |
| Frequency | 40-60Hz |
| System air pressure | 6 bar |
| Centrifulgal force | 200-300kN |
| Hopper capacity | 1.2m3 |
| Feeding pipe inner dia | DN25 mm |
| Electrical control mode | Inverter drive |
| Cooling mode | Circulating water cooling |
| Air flow rate | 10m3/min Vibroflot Compaction is a deep compaction technique for densifying
granular soils with less than 10 –15% silt present. This method is
popular for improving reclaimed land. Under the influence of
simultaneous vibration and
saturation, loose sand and or gravel particles are repacked into a
denser state and lateral confining pressure within the soil
mass is increased.The Vibroflot is normally suspended from a
standard crawler crane or a piling rig. | Max rotation speed | 1200-1800rpm | | Working pile diameter | 900-1200mm | | Frequency | 40-60Hz | | System air pressure | 6 bar | | Centrifulgal force | 200-300kN | | Hopper capacity | 1.2m3 | | Feeding pipe inner dia | DN25 mm | | Electrical control mode | Inverter drive | | Cooling mode | Circulating water cooling | | Air flow rate | 10m3/min |
|
