Waterwell Overburden Drilling System Rock Core Drill Bits 2 Inch

Product name:114MM single use symmetric casing drilling bit for waterwell drilling

Product model: Mring casing bit

Matched hammer: Hammer DHD3.5

Matched casing pipe OD: 108mm

Kingdrilling MRING overburden drilling systems are designed to use ring bit which is not connected to casing shoe.
Special profile DTH Bit passes through enough large inner diameter of ring bit.

Kingdrilling MRING Casing bit technical parameters:

How to order:

Casing Tube OD & ID + Ring Bit Diameter + Hammer Shank + Maximal Normal Bit Diameter +

Casings and Casing Shoes Installation Method (if by threads, threads standard must be offered)

Other size of MRING system is available upon customer's request

FAQ:

1. What is total overburden pressure?

Overburden pressure is a geology term that denotes the pressure caused by the weight of the overlying layers of material at a specific depth under the earth's surface. Overburden pressure is also called lithostatic pressure, or vertical stress.

2. What is overburden removal in mining?

In mining, overburden (also called waste or spoil) is the material that lies above an area that lends itself to economical exploitation, such as the rock, soil, and ecosystem that lies above a coal seam or ore body.

3. Why is percussion drilling used?
Cable percussion drilling is a tried and tested method of site investigation. The drilling technique allows the installation of casing inside the borehole to prevent loose soils collapsing into the hole, allowing the borehole to be advanced to considerable depths while maintaining good progress.

Products Manufacturing: