Cast In Place Concrete Pile Solar Panel Ground Mounting Frames Q235b Racking

Cast-In-Place Concrete Pile Ground Mounting System Solar Power Station Solar Photovoltaic System

Cast-in-place concrete pile is a kind of pile which is formed by directly forming a hole on the site pile position, then pouring concrete in the hole or placing a reinforcement cage and then pouring concrete. Its characteristics are as follows:

• Compared with the hammering method, the construction noise and vibration are much smaller;
• It is possible to construct a pile having a diameter much larger than that of the prefabricated pile;
• It can be used on various foundations;
• The construction quality has great influence on the bearing capacity of the pile;
• Since concrete is poured in muddy water, it is difficult to control the quality of concrete.

If the engineering geological hole forming conditions are good, the column foundation is in the form of cast-in-place pile foundation with simple structure. The construction process is as follows:

• Surveying and setting out
• hole digging machine hole forming
• lower retaining wall barrel
• Installation of reinforcement cage
• Cast-in-place pile pouring
• Installation of Formwork
• Ground concrete pouring
• Installation of embedded parts
• Elevation and main line retest
• Sealing and curing

As a PV enterprise, Lipu Metal has been focusing on the R&D, production and sales of solar mounting system and PV frames. Due to Lipu Metal has a professional design and development team, so it has obtained nearly 17 domestic and foreign product patents so far. Professional production and QC team, which is strictly controlling the quality from raw materials to finished products accordance with the ISO9001 international quality system standards.

Lipu Metal can not only produce conventional PV mounting system products and accessories, but also can offer the design which will meet the customized needs. According to the situation of different projects, Lipu Metal will provide matched mounting system solutions. From the beginning of purchasing from Lipu Metal, customers can enjoy a series of supporting services, including field investigation, measurement & calculation, design, installation support and after-sales service.

Technical Data

Project reference

About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for aluminum frames;
• Lipu Metal has obtained 17 product patents so far.

About Factory