PE/PP Separator Ceramic Coated Separator 2325 Separator Lithium
Battery Materials
Lithium battery materials--Celgard separator--Li-ion battery
separator/membrane
1. Thickness: 16&18&20&25&30&40micron
2. Width: 60mm
3. MOQ: 50Sqm
Specification for 16micron thickness for reference:
TermUnitInspection value
Appearance Ivory-white
Thicknessmicron16± 2
Gas permeabilitySec/100ml350-550
Porosity%38-44
Puncturing Strengthg>300
Tensile strength MDMpa>90
Tensile strength TDMpa>100
Film close temperaturedegree≤ 135
Film break temperaturedegree≥ 147
90 degree heat shrink MD%≤ 3.5
90degreeheat shrink TD%≤ 2
105degree heat shrink MD%≤ 5
105degree heat shrink TD%≤ 3
120degree heat shrink MD%≤ 20
120degree heat shrink TD%≤ 15
Advantages:
High safety: Multilayer membrane efficiently reduces the safety
hazards (crystal point, holes…) which are found as defects on
single layer membrane; No TD shrinkage, , low MD shrinkage; Perfect
heat resistance and anti-oxidant; High puncture strength &
mechanical strength , suitable for high/low voltage system.
Good uniformity: Using popular dry & uniaxial stretching
process, insure the pore sizes uniformity and well distributed on
membrane. The separator has multilayer structure with better
thickness uniformity to improve Li-ion battery cycle life.
Excellent air permeability: High porosity, high air-permeability,
low sinuosity, suitable for high rate discharging of electric
vehicle Li-ion battery.
Various products: Basic separator, Ceramic coated separator,
Polymer coated separator, Multifunctional hybrid coating separator,
Multi-layer functional coated separator.
| Thickness | 16± 2micron | Gas permeability | Sec/100ml350-550 | | Porosity | 38-44% | Puncturing Strength | >300g | | Tensile strength | MDMpa>90 | Tensile strength | TDMpa>100 | | Film close temperature | degree≤ 135 | Film break temperature | degree≥ 147 |
|
