Titanium Rectification Tower Tray Packed Column Internals High Temperature

Titanium Rectification Tower Tray Tray High Efficiency TA2 Packed Tower Internals

​Titanium Distillation Column Packed Tower Internals Introduction

The reason why it is called the gas-liquid distributor in the groove plate is because it is a plate-type distributor formed by welding several distribution groove gauges after sorting. The name is "trough-disc gas-liquid distributor".

The gas-liquid distributor of the trough plate is composed of a rectangular gas riser, an angle steel or channel steel conduit, a dovetail or a channel steel baffle hood, a plank, a support ring and a support beam. The main difference between it and the disc type liquid distributor is that the upper and lower rows of small holes are opened in the upper, middle or lower middle of the rectangular riser respectively, and the different diameter holes on the same vertical line are guided by angle steel or channel steel. The liquid pipe is covered. The liquid in the tray enters the liquid pipe through the spray hole. Under the protection of the catheter, the liquid passes through the high gas velocity area and the variable gas velocity area, and starts from the low gas velocity area, so the extension length of the catheter is 100mm.

Introduction of titanium raw materials: Titanium has metallic luster and ductility. The density is 4.5 grams/cubic centimeter. Melting point 1660±10℃. Boiling point 3287℃. Valences +2, +3 and +4. The ionization energy is 6.82 electron volts.

The main characteristics of titanium are low density, high mechanical strength and easy processing. The plasticity of titanium mainly depends on the purity. The purer the titanium, the greater the plasticity. It has good corrosion resistance and is not affected by the atmosphere and seawater. Under normal temperature, it will not be corroded by hydrochloric acid below 7%, sulfuric acid below 5%, nitric acid, aqua regia or dilute alkaline solution; only hydrofluoric acid, concentrated hydrochloric acid, concentrated sulfuric acid, etc. can act on it.

​Packed Tower Internals Support feature

High strength and stiffness. Packing pallets bear both the weight of the tower packing and liquid, as well as additional pressures during operation, such as pressure fluctuations, mechanical vibrations, and temperature fluctuations.

Adequate open area rate. The open porosity of the packing tray should be greater than the porosity of the tower packing. This can not only ensure the passage of gas, but also prevent liquid flooding.

Large release cross-sectional area. The free cross-sectional area of the liquid passage should be 1.5 times the surface area of the tower packing and larger than the opening area of the tower packing. If the free cross-sectional area is too small, it may cause fluid plugging, increased pressure drop, reduced efficiency, or even flooding.

Simple structure. Simple structure, convenient installation and maintenance.suitable structure. The structure should be conducive to the uniform distribution of liquid and gas and keep the resistance small (not more than 20 Pa).

Corrosion resistance. It must be stable in chemical and other corrosive environments.

Column Internals Gas-liquid Distributor Shape

About Us

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!