PPH Distillation Tower Packing Corrosion Resistant High Performance

PPH Corrugated Plate Packing Plastic Structured Packing For Distillation Tower

 
Plastic Structured Packing For Distillation Tower Introduction

The filler has excellent acid resistance and heat resistance. It can corrode various inorganic acids, organic acids and organic solvents except hydrofluoric acid. It can be used in various high and low occasions. The application range is very wide.

It can be used in chemical industry, metallurgy, gas Drying towers, absorption towers, scrubbing towers, regeneration towers for oxygen production and other occupations. According to the material, it can be divided into three categories: ceramic filler, plastic filler, metal filler.

Plastic Structured Packing For Distillation Tower advantages

Light weight, large capacity, low pressure drop, high specific surface area and easy replacement. Wire mesh corrugated packing is composed of polypropylene and polyacrylonitrile wire mixed braided mesh. The inclined corrugated packing is made of polypropylene or PVDF board. In order to improve the mass transfer efficiency, the board can be perforated.

Plastic Structured Packing For Distillation Tower Features

Plastic fillers have the characteristics of large void ratio, low pressure drop and mass transfer unit height, high flooding point, sufficient vapor-liquid contact, and high mass transfer efficiency.

Plastic Structured Packing For Distillation Tower Application

Plastic packing is widely used in packing towers with a temperature of 60-280 ℃ in various media in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries.

Physical and chemical functions of plastic fillers:

FunctionMaterial Density g/cm PE0.94~0.96 PP0.89~0.91 RPP0.92~0.94 PVC1.32~1.44 CPVC1.50~1.54 PVDF1.75~1.78

Operating temperature℃ ≤90 ≤100 ≤120 ≤60 ≤90 ≤280

Chemical resistance Corrosion resistance Corrosion resistance Corrosion resistance Corrosion resistance Corrosion resistance

Compressive strength N/mm ≥6.0 ≥6.5 ≥7.0 ≥6.0 ≥8.0 ≥10.0

 
Corrugated Plate Packing Plastic Structured Packing Specification

Structured packaging has two slants, "X" and "Y". The "Y" type packing, with an inclination of approximately 45º to the horizontal axis, is the most widely used packing. They offer higher filtration efficiency than the "X" type, but at the cost of higher pressure drop/lower capacity. The "X" type packing has an inclination of 60° to the horizontal axis and is suitable for high volume and low pressure drop applications.

About Us

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.

During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!

FAQ

Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.

Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!

Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.

Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.