316 Stainless Steel Wire Mesh Demister DN300-6400mm Alkali Resistance

York Mesh 421 316 Stainless Steel Gas Liquid Wire Mesh Demister

Wire Mish Demister for removing liquid droplets Introduction

The wire mesh demister is mainly composed of a wire mesh and a wire mesh grille to form a wire mesh block and a supporting device for fixing the wire mesh block. The wire mesh is a gas-liquid filter of various materials, and the gas-liquid filter is made of metal wire or Non-metallic wire composition.

The non-metallic wire of the gas-liquid filter is made by twisting multiple strands of non-metallic fibers, or it can also be a single strand of non-metallic wire.

The wire mesh demister can not only filter out the larger liquid foam suspended in the air flow, but also filter out the small and micro liquid foam. It is widely used in gas-liquid in chemical, petroleum, tower manufacturing, pressure vessel and other industries in the separation device.

Only when there is air space inside the chamber, the vapor-liquid separator is effective. It can fail either when the mixed stream inlet is overwhelmed or the draining of collected liquid is slower than its growing. Considering this, the separator may be combined with some liquid level sensing accessories, such as a sight glass or float sensor. By doing this, both the supply and drain flow can be regulated to prevent the separator from being overloaded.

Wire Mish Demister Material

Low Pressure Drop Wire Mish Demister Advantages

Compared with 316L and 317L austenitic stainless steel, duplex stainless steel 2205 alloy has superior performance in pitting and crevice corrosion resistance. It has high corrosion resistance. Compared with austenite, its thermal expansion The coefficient is lower and the thermal conductivity is higher.

The duplex stainless steel 2205 alloy has twice the compressive strength compared to austenitic stainless steels, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50°F/+600°F temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

Company Profile

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment.The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!