Metal Roller Cylindrical Thrust Bearing 29232 Low Friction Minimum Lubrication

      1) Low friction
       2) Minimum lubrication
       3) Wear resistant
       4) Running in not required
       5) Requires little attention
       6) Dimensions relatively small
       7) No scraping required to fit shaft
       8) Easy replacement   

How to expand the lifetime of 29232  spherical thrust roller bearing:

1. The installation is correct, that affects precision, life, performance. And fill the bearing with lubricant after installation.

2. Don't allow strong impact, such as hammer striking, transfer roller pressure

3. Use the accurate installation tool, avoid to use cloth kind and short fibers

4. Lubricate the bearing to avoid rust with high quality mineral oil, especially in summer

5. General inspection, such as the surrounding temperature, vibrate, noise inspection

6. Keep bearing cleaning from dirt, dust,pollutant, moisture.

Company information:

FAQ

What is a roller thrust bearing?

Thrust spherical roller bearings contain convex rollers that make them self-aligning and unaffected by mounting error and shaft deflection. The E-type offers a high load capacity design with a pressed steel cage.

What is the purpose of the thrust bearing?

Thrust bearings support the axial thrust of both horizontal and vertical shafts. The functions are to prevent the shaft from drifting in the axial direction and to transfer thrust loads applied on the shaft.

Where are roller thrust bearings used?

Thrust bearings are used in cars because the forward gears in modern car gearboxes use helical gears which, while aiding in smoothness and noise reduction, cause axial forces that need to be dealt with. Thrust bearings are also used with radio antenna masts to reduce the load on an antenna rotator.