MTP MPO To LC OM3 OM4 Multimode Patch Cord Breakout Fanout Cable

MTP MPO To LC OM3 OM4 Multimode Patch Cord Breakout Fanout Cable

MTP MPO to LC Fiber Multimode OM3 OM4 Breakout / Fanout Cable Patch cord

Overview of MTP MPO to LC fanout cable patchcord 

The MPO Breakout cable is with MTP or MPO connector at one end, while at the other end is LC standard connector. It is designed for data centers and wiring closets – one MPO or MTP connector to 4, 6, or 12 duplex LC connectors. It is widely used to support 10G to 40G, 25G to 100G, and 100G to 400G.

MPO/MTP to LC harness cables are used to fan out the 12 core MPO/MTP fibers into generic connectors, usually it is MPO/MTP to LC, but we can also make it MPO/MTP to SC/ST, FC, MTRJ, E2000, etc. The MPO/MTP harness cable is used to transit from backbone trunk cables to fiber management racks, cable jackets available are Mini-Core Plenum (OFNP), Mini-Core Riser (OFNR), Mini-Core Low Smoke Zero Halogen (LSZH), typical optical fiber types are single mode OS2, multimode OM1, OM2, OM3, OM4, OM5. The MPO/MTP to LC harness cables can be made with 2mm or 3mm ruggedized furcation legs in customized length, this will hep make it more rugged.

Features of MTP MPO to LC fanout cable patchcord

1. Begate MPO/MTP harness cable is with low loss performance.
2. MPO / MTP in 8/12/16/24/32 fibers interfaces for choices.
3. This MTP/MPO fanout harness cable is available in OS1, OS2, G.657A2, OM3, OM4 Fiber Grades – OM1 and OM2 available upon request.
4. Option for LSZH, OFNP or OFNR cable jacket.
5. 100% High precision factory pre-terminated and tested MTP/MPO harness cable assemblies.
6. Pulling eyes are provided as an option to protect the fiber ends during installation.
7. Save installation and reconfiguration time.

8. Meet the standards of TIA/EIA and IEC.

9. Round Mini-core cable with minimal cable diameter for high density installations.

Application of MTP MPO to LC fanout cable patchcord

MPO/MTP to LC harness cables are used to connect the MPO/MTP cassettes, patch panels or backbone trunk cable assemblies with the active optical devices, typical cable diameter is 3mm or 4.5mm, with multiple fiber cores inside, options include 24 cores, 48, 72, 96 and 144 cores. We make the MPO/MTP to LC harness cables at good quality and competitive prices, the MPO/MTP to LC harness cables are perfect choice for high speed network environment, such as 40G, 100G and more. Except for the LC connectors, we can also assemble it to be with SC/FC/ST connectors.

Technical specification of MTP MPO to LC fanout cable patchcord 

MPO MTP termination:

Fanout connectors termination:

Technical structurer of MTP MPO to LC fanout cable patchcord 

Assembling line of MTP MPO to LC fanout cable patchcord

Data center solution series products

1.  MPO/MTP Trunk Cable
2. MPO/MTP Harnesses Cables
3. MPO/MTP Fan out 0.9mm Patch Cords
4.  IP-Series MPO/MTP Assembly
5. High Density Patch Cords
6. MPO/MTP Loopback
7. MT Patch Cords
8.  MPO/MTP Cassettes
9. MPO/MTP Fiber Optic Patch Panel

Custom MTP MPO to LC fanout cable patchcord cables including custom lengths, jacket colors and other options are available upon request.
To find out more information, please call us or email us.