30-240W IP66 Explosion Proof High Bay Light Fixture

30~240W IP66 tunnel light LED Explosion Proof High Bay Fixtures Cancer SERIES

• Product description:

Cancer series tunnel light is the dedicated product to light the tunnel to the highest standards of comfort and safety, delivering excellent performance in every tunnel application while simplifying operations and reducing costs. This series offers a range of different powers to meet various tunnel requirements.

• Applications:

Cancer series tunnel light can be used in tunnels, underpasses, subways, industrial areas, general area spaces, and other exterior lighting places.

• Features:

Anti-glare optical lens, comfortable lighting effect.

Various beam angles: 15° / 30° / 60° / 90° / 120° / T2M / T3M / T4M.

Porous side cover design, excellent cooling performance.

180° maximum adjustable angle of the whole lamp, for different angle requirements and flexibility. 5-YEAR WARRANTY 50,000 LIFETIME HOURS Asymmetric and symmetric lighting solutions can be offered. Symmetrical light distribution delivers uniform and even light in all directions, and asymmetrical light distribution helps to focus the light on the required area.

A removable bracket is provided for easy installation, and adjustable mounting bracket for installation flexibility.

• Temperature performance data:

Ambient temperature  -40°C to 50°C (-40°F to 122°F)

• Standard materials:

Housing: Aluminum 6063

Optical materials: Tempered glass, PC lens

• Ordering information:Part number example

Example: TU-CA1 30W UXYZ

• Technical datas: 

CRI: 70/80

Beam Angle 15° / 30° / 60° / 90° / 120° / T2M / T3M / T4M
Impact Resistance IK08

Ingress Protection IP66

• Packing information:

• Installation:
• 12.1 Warnings:

PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION.

1.  The luminaire should only be installed by qualified personnel. Please ensure that you have verified the safety of any existing power distribution systems before attempting installation. Failure to follow operating instructions may lead to death, severe injury, or property damage.
2.  Turn off power before attempting installation or servicing to avoid electric shock or component damage.
3.  The product must be installed in accordance with the national electric code (NEC) and all applicable federal, state and local electric codes and safety standards.
4.  All electrical work must conform to the National Electric Code (NEC) and all applicable local codes and ordinances.
5.  Follow all applicable safety procedures and use personal protective equipment such as hardhats, safety glasses, reflective vests, electrical safety gloves, fall protection equipment and safety toe boots during installation, operation, and maintenance of the luminaire.
6.  DO NOT make or alter any open holes in the luminaire.  
7.  Disconnect product and allow cooling prior to servicing.
8.  Any alteration or modification of this product is expressly forbidden as it may cause serious personal injury, death, property damage, or product malfunction.
9.  To prevent product malfunction and electrical shock, this product must be properly grounded.
10.  This luminaire is designed to operate in ambient temperatures ranging from -40°C (-40°F) to 50°C (122°F) and to be horizontally mounted with the LEDS facing down.
11.  Min 90°C supply conductors.
12.  Consult a qualified electrician to ensure correct branch circuit conductor.
13.  The product is not available for several special environments, such as places with corrosive gas liquids or high pressure water vapor.
14.  Eye protection is required at all times during installation, operation, and maintenance of the luminaire. The high intensity light produced by the luminaire can cause severe damage to eyes if viewing directly at close range. Avoid being in front of a luminaire that is on, or wear suitable light blocking protective eyewear such as welding goggles.
15.  Store luminaires in a clean, dry place, protect them from dirt, water, and sunlight.

• 12.2 Installation guide:

12.2.1 Istallation diagram:

2. Adjust the direction of the lamp body and lock the screws.

3. AC cable:

• 12.2.2 General steps:

1.  Drill appropriate knockout according to the size of the mounting bracket.
2.  Once fxture is positioned, secure the fxture with screws tightly.
3.  Make all necessary wiring connections, observing proper voltage and polarity. Ensure that wires are seated properly and not being pinched.
4.  Once connections are completely made, carefully push all wires down into the housing and secure it tightly.
5.  Using aiming sight to orient desired mounting angle.

• Dimensions (in inches):

Cancer 1 TU-CA1 30W/50W UXYZ                                       Cancer 2 TU-CA2 80W/100W UXYZ

Cancer 3 TU-CA3 120W/150W UXYZ                                   Cancer 4 TU-CA4 180W/200W/240W UXYZ

• Photometrics:

Beam angle: 15° / 30° / 60° / 90° / 120° / T2M / T3M / T4M.

• QA:

Q1. Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available.

Q2. How do you ship the goods and how long does it take to arrive?

A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive. Airline and sea shipping also optional.