Custome Precise Epoxy Ntc Temperature Sensor For Auto And Industry

Custome Precise Epoxy Ntc Temperature Sensor For Auto And Industry

Brief Instruction (Product Description):

It is consist of the insulated wire (PVC wire,XLPE insulated wire), NTC chip and epoxy resin. The optional resistance value range 0.3kΩ to 2000kΩ, and beta value range 2500K to 4500K.

Features:

Comply for ROHS standard

PVC insulated lead wires series

Operating temperature range: -20℃~105℃

Good stability and reliability

Easy to install and manipulate as the sealing can be done according to environment

Temperature measurement precision

Application:

Appliances, cars, industrial equipment, etc

Structure and Dimensions:(unit:mm)

Electrical specification:

Product picture:

Standard packing (inner packing): 1pcs~100pcs/polybag

Operation Notice

1.Application:Temperature measure and control；　

2.The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.

3.Avoid excessive heat shock,The hot air blow should beat least 30mm to the probe in case heat shrink protection tube need to be attached.

4.Storage Temperature -10℃～40℃,≤75%RH；Avoid in a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.

5.According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, especially when the component is heated.