Micro NTC Thermistor Medical Temperature Sensor For Temperature Measurement

Micro NTC Thermistor Medical Temperature Sensor For Temperature Measurement

Brief Introduction:

The item is one miniature medical temperature sensor NTC thermistor. The miniature medical temperature sensors are encapsulated with epoxy in polyimide tubes OD 0.3mm&OD0.6&OD1.0. It takes the enamelled wire OD 0.05*2mm&OD0.12*2&OD0.2*2 as the lead wire.

Features:

Miniature designed

Fast thermal response time, for example, several seconds

Operating temperature range: 0℃~100℃

Application:

Ablation temperature monitoring

Blood temperature monitoring

Incubators, patient warming, and endovascular cooling sensors

Structure and Dimensions:(Unit: mm)

Standard packing (inner packing): 1 pcs/polybag

Operation Notice:

1. Application: Temperature measure ；　

2. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.

3. Avoid excessive heat shock, The hot air blow should beat at least 30mm to the probe in case a heat-shrink protection tube needs to be attached.

4. Storage Temperature -10℃～40℃,≤75%RH； Avoid a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.

5. According to the structure of the Glass coating NTC thermistor, when the end-user is installed, to avoid the epoxy head being subjected to too much tensile force and bending force from the lead wire, The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head. So as not to hurt the chip, resistance drifting and even open circuit, especially when the component is heated.

Product Images: