PCB Black Potting Glue Two Component Silicone Potting Mix Adhesive
|
|
Aorun-2518 black potting compound AB glue driver pcb electronic two component silicone potting mix adhesive potting compound
Quick Detail:
Description: 1. Comply with American UL standard, 94V0 grade, UL number: E513688 2. Low viscosity, good fluidity, easy to penetrate; 3. moderate curing speed;
thermal conductivity between 1.2~1.5. Specification:
The above performance data is typical data measured in a laboratory
environment with a temperature of 25°C and a humidity of 70%. It is for
customer reference only Operative method and tips: 1. Working environment: Please
keep the plastic container clean. A, B components are strictly
according to the weight ratio, accurately
weighed, and
stirit evenly along the inner wall of the container clockwise
until it is used for 3-5 minutes. 2. According to the operating
time and amount of glue deployment, to avoid waste. When the
temperature is lower than 15 ° C, please
pre-heat the
A glue to 30 ° C and then adjust the rubber, easy to operate
(low temperature, A glue will thicken ); After use must seal
the lid,to avoid the product due to moisture absorption scrapped. 3. When the relative humidity is
more than 85%, the surface of the cured product can easily absorb the
moisture in the air to form a
whitemist.Therefore,when the relative humidity is more
than 85%, it is not suitable for room temperature curing. It is
recommended to
use the heating and curing. 4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption. Tips: 1. If it is used to
contact food after curing, the temperature of the food should not
exceed 50 degrees Celsius. 2. When the hardness is higher than 82D (Shaw hardness), it can be directly polished. 3. The mixing quantity should not exceed 5kg, and the casting thickness should not exceed 3cm each layer. 4. When the temperature is higher than 25 degrees Celsius, it will cure faster, please reduce the number of mixing/casting by half, or it will be hardened in the container; 5. Curing time will be
depend on room temperature and casting thickness , the
room temperature higher it is, the faster curing it does.
The
thinner it cast the longer curing time it needs; Packaging: We offer different
size of packaging, 5kg buckets and 20kg buckets are normal size.
Customized
|
||||||||||||||||||||||||||||||||
| Product Tags: PCB Black Potting Glue Black Potting Glue mix adhesive PCB silicone potting gel |
|
Cheap Price Auto Engine Systems Ignition Coils For Bmw Ford Toyota Honda Mitsubishi VW Peugeot Mazda Benz Audi |
|
Car Ignition Coil For Hyundai Kia Jiale (Import) 2.0L Oem 27301-23400 |
|
Engine Car Ignition Coil 90080-19015 90919-02239 For Toyota Corolla Vibe 1.8l 16v Uf247 |
|
Auto Parts High Quality Ignition Coil 90919-02240 90919-02265 For To-Yota Prius NHW20 2004-2009 |
|
Two Component 1:1 Silicone Thermal Glue Compound Adhesives |
|
Silicone Rubber Epoxy Potting Compounds Pouring Sealant For Potting Electronic |