Stainless Steel 192L 40KHz Industrial Ultrasonic Cleaner For Plastic Mold Injection Mold Die Casting Mold
Specifications:
| Model name | F-600 |
| Internal tank size | 800*600*550mm |
| Application | Clean Spray Flannel Mold |
| Function | Removing dirts, oil, rust, grease |
| Feature | No damage to precision mold |
| Tank capacity | 264L |
| Ultrasonic power | 3000W |
| Heating power | 7000W |
| Time control | 0~99 minutes |
| Temperature control | 20~95℃ |
| Water inlet / outlet | Yes |
| Voltage | 220V / 110V |
Same models with different capacity
| Model | capacity | tank size(mm) | Ultrasonic power |
| F-120ST | 38L | 500*300*250 | 600W |
| F-120 | 45L | 500*300*300 | 700W |
| F-180 | 53L | 500X350X300 | 900W |
| F-240 | 77L | 550X400X350 | 1200W |
| F-300 | 99L | 550X450X400 | 1500W |
| F-301 | 96L | 800X300X400 | 1500W |
| F-360 | 135L | 600X500X450 | 1800W |
| F-480 | 175L | 700X500X500 | 2400W |
| F-600 | 264L | 800X600X550 | 3000W |
| F-720 | 360L | 1000*600*600 | 3600W |
Why an Ultrasonic Cleaner is Ideal for Aircraft Parts
In three words: thorough, safe and fast. Contaminants missed by manual cleaning are usually those deep in crevices and on other surfaces impossible to reach. Moreover, highly finished mold surfaces can be scratched or otherwise damaged by manual processes. Large molds can be difficult to maneuver, further risking damage during manual cleaning. And the longer it takes to clean the molds the greater the risk of damage.
Ultrasonic cleaning action solves all three issues.
It is thorough because it reaches all mold surfaces immersed in a biodegradable water-based ultrasonic cleaning solution. It is safe because while the cleaning action can be termed “violent” it occurs so fast that highly polished injection mold surfaces are not damaged during the cleaning process. By fast we mean 10 to 15 minutes although large complex molds may require a longer cleaning cycle.
Aircraft Parts Cleaning by Cavitation Action
Cavitation action is described as the implosion of countless minute bubbles against surfaces of products immersed in the cleaning solution. Bubbles are created when generator-powered transducers bonded to the ultrasonic cleaner tank vibrate at ultrasonic frequencies measured in thousands of cycles per second or kilohertz (kHz).
Selecting the cleaning equipment is governed to a large extent by the size of molds being cleaned. Ultrasonic cleaners are available ranging from small benchtop units to industrial-sized floor-mounted equipment that can be fitted for automated cleaning and rinsing cycles. But do select a cleaner with a heater, timer and sweep mode.
